Audio Power Specifications

Specifications

Power Output and Total Harmonic Distortion: 13.5 watts per channel minimum continuous average output into 4 ohms, 4 channels driven, from 30-15,000 Hz with no more than 1% total harmonic distortion.

Other Specifications

Tuner

Tuning Range: Intermediate Frequency: FM Mono Sensitivity: Seek lo sensitivity:

Seek sensitivity Selectivity: Signal-to-Noise Ratio: Harmonic distortion at 1 kHz: Separation:

Frequency Response:

Tuning Range:

Seek LO (Local) sensitivity Seek DX (Distant) sensitivity: Intermediate Frequency: Signal-to-Noise Ratio: Frequency Response:

87.5- 107.9 MHz

10.7MHz

13dBf

51dBf

31 dBf

80 dB at 400kHz

65 dB (stereo), 70 dB (mono)

0.7% (stereo), 0.5% (mono)

30 dB

30-15,000 Hz ± 3 dB

530 - 1,710 kHz

50dBμV

25dBμV

450kHz

50dB

30-5,000 Hz + 3dB

Cassette

Signal-to-Noise Ratio:	55 dB
Tape Wow and Flutter:	0.10% dB
Tape Frequency Response:	30-18,000 Hz ± 3 dB

Audio

Speaker Impedance:	4-8 ohms
Maximum Amp Power:	4	X 35 Watts (at 4 ohms)
RMS Power:	4	X 13.5 Watts (at 4 ohms) <1% THD
Bass Control:	± 10 dB @ 100 Hz
Treble Control:	± 10 dB @ 10 kHz
Loud1:	+ 8 dB @ 60 Hz & + 2 dB @ 8 kHz
Loud2:	+ 12 dB @ 60Hz & + 4 dB @ 8 khz
Preamp Outputs:	4-Channel, Low-Impendance (200 Ω) Preamplifier
Preamp Output Voltage:	Over 3 Volts of Distortion-Free Preamp Output

General

Dimensions (w/o projecting parts/controls):	180 x 50 x 155 mm
	7 x 2 x 6 1/8 in.
Mass:	Approx. 1.4 kg (3.0 lb.)
Power Requirement (neg. grnd.):	12 V DC car battery (11-16 V DC allowable)
Operating Temperature:	15°F to 120°F, –10°C to 50°C
Supplied Accessories:	• Unit
	• Faceplate
	• Wire Harness, including 2-Channel RCA Preamp Output
	Harness
	• DIN Sleeve
	• Mounting Hardware
	• Owner’s Manual in English, French, Spanish and Portuguese
Optional Accessories:	• CDC-A05 or A071 CD Changer
	• 4-Channel Preamp Output Harness-Part No. 8634494218
	(Harness Available in USA at 1-800-920-2121)

Design and specifications subject to change without notice.