Disc Name Table, Track Repeat, Disc Repeat

Disc Name Table

Until the changer has the chance to identify the discs in a newly-inserted magazine, the names of any named discs are not available. When a new magazine is inserted, the changer reads and identifies the discs’ names at the earliest of the following opportunities: Disc Select (automatic or manual), Disc Scan, or Disc Select during Disc Naming mode. Or, if you switch to another source before the discs have been read, the changer automatically reads and identifies the names of the unread discs in a background scan that lasts at most about 2 minutes, making the names readily available as soon as possible!

Track Repeat

To play current track repeatedly, press RPT as needed until RPTI appears. If track manually advanced, RPTI remains active for new track.

Disc Repeat

To play current disc repeatedly, press RPT as needed until RPTII appears. Once all tracks on disc are played, disc is repeated. If disc manually advanced, RPTII remains active for new disc.

To cancel RPT feature, press as needed until RPT indicator disappears.

Track Mix

Press MIX as needed until MIXI icon appears. This also cancels repeat, scan, and TPM features, if previously active. A track will not be played a second time until all tracks have been played. Once all tracks have been played, next disc is selected.

Disc Mix

Press MIX as needed until MIXII appears. MIXII behaves per software in CD changer. Press of /\ / V during MIXII mode returns unit to regular play. To cancel MIXII, press as needed until MIX indicator disappears.

Permissible combinations of MIX and RPT

Press of MIX during RPTII mixes all of tracks within one disc continuously.

Pause

To pause, press ll Δ. To resume playback, press again or press other playback button.

Track Scan

Press SCA to start Track Scan. “TRCKSCAN” appears, then Track No. and Elapsed Play Time blink during scanning operation. Unit stops at each track for scan time set under Menu. After scanning all tracks on disc, unit advances to next disc. Unit continuously scans until user stops scan by pressing a source control, SCA or MENU. SCA deactivates any previously-active MIX or RPT modes.

Disc Scan

Press SCA for more than 2 seconds to start Disc Scan. “DISCSCAN” appears, then Disc Names (or if unnamed, Disc Nos.) blink during scanning operation. Unit stops at each disc as per CD scan time set under Menu. Unit continuously scans until user stops scan by pressing a source control, SCA or MENU. Disc Scan also deactivates any active previously-active MIX or RPT modes.