Blaupunkt CM147 Using the Menu See Traffic Safety & Precautions on, Clock Adjustment Clockset

Page 21

Using the Menu (See Traffic Safety & Precautions on page 4)

1.Press DIS/MENU for 2 seconds to enter Menu mode.

2.Press /\ / V controls to scroll through Menu.

3.Use << or >> to change Menu setting (or to enter the following modes: Turn-on Message, Clock Adjustment, Timer Set, Station Name Access/Edit and Disc Name Access/Edit.)

4.Exiting Menu: Press of DIS (or after 8 seconds), unit exits from Menu. Changes are stored upon manual or automatic time-out of Menu or turn-off by PWR button — but not stored if exit caused by panel release or ignition off.

Turn-On Message Activation (“MSG ON”/”MSG OFF”)

Press << or >> to turn message on or off.

Turn-On Message Programming (“MSG ENTR”)

The unit can scroll a 40-character message across the display at the time of turn-on. To create your own message:

1.Press >> button. Eight characters appear with the first one blinking.

2.Press /\ / V to select desired characters. If you want to put a blank space in name, select “__”.

3.Press << or >> to locate next character.

4.After eighth character (the farthest right character) is completed, first (left-most) character of next group of eight characters begins to flash. After fifth group of eight characters, pressing >> will access first group again.

5.Press Mute to store turn-on message and return to Menu.

Clock Adjustment (“CLOCKSET”)

Pressing << or >> shows blinking time. Subsequent press of << advances the hour; >> advances the minutes. (To change minute indicator to nearest hour (:00), press Mute button). Unit begins keeping the time when /\ or V is pressed or when Menu mode ends.)

Tuner Timer Set Mode (“TMR SET”)

1.Before entering Menu, tune in the radio frequency to be activated by timer.

2.Enter Menu mode and scroll to “TMR SET” by pressing /\ or V.

3.Press << or >> to enter timer adjustment mode.

4.Select time that unit should switch to this station by pressing << to adjust hours, >> to adjust minutes. Press Mute to adjust minutes to :00.

5.To store station and time, press /\ / V or DIS.

Tuner Timer On/Off (“TMR ON”/“TMR OFF”)

Tuner timer allows unit to go to a certain frequency at a certain time — from any source. When ignition on and unit off, the timer even turns the unit on and goes to the specified frequency. Press << or >> to turn Tuner Timer on or off.

Radio Monitor (“RM ON” & RM OFF”)

Allows radio to play during tape winding or scan. If this feature has been activated, RM icon appears when tape is in use.

Blank Skip Time (“BSKPTIME”)

When unit reaches a blank section of tape, it can automatically fast-forward to next recorded

21

Image 21
Contents Page Owner’s Record FCC WarningTable of Contents Traffic Safety and Precautions FeaturesDetaching & Attaching the Face Detachable FaceDetaching the Face Attaching the FaceGeneral Recommendations Electrical Connections and InstallationAntenna Motor Trigger Switch Recommendations InstallationMounting Hardware Mounting The Unit in Most DashboardsMounting the Unit in a Japanese Car Fuse Replacement MaintenanceCleaning the Connectors Removing the UnitPage Specifications Audio Power SpecificationsOther Specifications Location of Controls Instructions General Operation Radio Operation Audio OperationTuning Sensitivity Sens Seek TuningStereo Symbol Manual TuningCassette Tape Player Operation Auxiliary Input Jack Track Repeat Disc Name TableDisc Repeat Track MixDirect Software Control Menu Changer Track Program Memory Skip/Play/MemoryClock Adjustment Clockset Using the Menu See Traffic Safety & Precautions onTuner Timer Set Mode TMR SET Tuner Timer On/Off TMR ON/TMR OFFMaximum Turn-On Volume Level Maxonvol Adjustable Mute Level Mute LVLBlank Skip Activation Scan TimesDisc Naming Discname Erasing ALL Radio Station NamesChanging a Disc Name Erasing One Disc NameAutomatically ejected Sound skips due to vibration Troubleshooting GuideCopyright 1997 by the Robert Bosch Corporation