Blaupunkt CD70 Volume adjustment, Mute setting, Setting the switch-on volume

VOLUME

Volume adjustment Mute setting

The system volume can be adjusted in steps from 0 (off) to 50 (maximum).

➮To raise the system volume, turn the volume control 3 to the right.

➮To lower the system volume, turn the volume control 3 to the left.

Setting the switch-on volume

It is possible to adjust the volume that will play when you switch the radio on.

➮Press the MENU button 8.

➮Press the soft key 4 with the display allocation “VAR”.

➮Press the soft key 4 with the display allocation “VOL”.

➮Set the volume using volume control 3 or the or buttons 7.

If you wish to set the volume active before the unit was last switched off as the switch- on volume,

➮press the button 7.

“LAST VOL” appears on the display.

Risk of serious injury! If the switch-on volume is set at the maximum, the volume can be very high when you switch on your car radio.

If the volume was set on maximum before the unit was last switched off and the switch-on volume is set at “LAST VOL”, the volume can be very high when you switch on your car radio.

In both cases, your hearing may suffer serious damage!

➮Press the OK button 5 to go back to

the previous menu level or the MENU button 8to leave the menu altogether. The settings are now stored.

This feature enables you to lower the system volume instantaneously (mute).

➮Briefly press the button 2. “MUTE” appears on the display.

Deactivating the mute setting

➮Briefly press the button 2

or

➮turn the volume control 3.

Mute during telephone

If your car radio is connected to a mobile tele- phone, the volume will be muted as soon as you “pick up” the telephone. In order for this to work, the mobile telephone has to be con- nected to the car radio as described in the instructions.

Setting the volume for the warning tone (beep)

If you hold down a button for longer than two seconds when using certain functions, e.g. storing a station on a station button, a warn- ing tone (beep) sounds. The volume of this beep is adjustable.

➮Press the MENU button 8.

➮Press the soft key 4 with the display allocation “VAR”.

➮Press the soft key 4 with the display allocation “BEEP”.

➮Adjust the volume using the and buttons.

If you wish to deactivate the beep,

➮press the button 7.

“BEEP OFF” appears on the display.

➮Press the OK button 5to return to the

previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.

ENGLISH

11