Theft protection, KeyCard
Your radio comes with two KeyCards.
To replace a lost or damaged KeyCard, con- tact your Blaupunkt dealer.
If you use two KeyCards, the settings for the first KeyCard are also used for the second KeyCard.You can, however, store the follow- ing functions individually:
Preset stations, beep volume, equaliser set- tings.
In addition, the last values set for frequency range, station, scanning time, and
This way, after you insert your KeyCard, the unit will always be in the basic configuration that you have chosen.
Inserting the KeyCard
➮Press the 
button to open the operat- ing panel 1.
➮Insert the KeyCard as shown in the pic- ture (Arrow 1) with the contacts facing downward.
➮Use the slide to push the card carefully in the direction shown by the arrow (2) as far as it will go.
2
1
3
➮Close the operating panel (Arrow 3).
THEFT PROTECTION
Note:
If a card that does not belong to the unit (for example, a bankcard) is inserted, the display will read “Wrong KC”.
Remove the incorrect card and insert a card that the unit is able to recognise.
Removing the KeyCard
To unlock the operating panel,
➮Press the 
button 1.
This will open the operating panel.
➮Use the “slide” to push the card to the right as far as it will go.
➮Remove the card from the operating panel.
➮Close the operating panel.
Note:
To discourage theft, always remove your Key- Card before exiting the vehicle and leave the operating panel open.
For reasons of safety, the operating panel must be closed whenever the vehi- cle is in motion.
Replacing / “training” KeyCards
Note:
No more than two KeyCards can be used for each unit.
If you already have two KeyCards for your unit and you “train” a third KeyCard, then the unit can no longer be operated with the KeyCard that was not used in training.
ENGLISH
7