Setting station scanning sensitivity

RADIO MODE

You can set the sensitivity of short- and long- range reception separately for AM and FM reception.

Sensitivity for short-range reception (S-LO)

➮Press the MENU button 8.

➮Press the soft key 4 with the display allocation “TUN”.

➮Press the soft key 4 with the display allocation “S-LO”.

➮Use the buttons 7 to select whether you want to set the sensitivity for the AM or FM frequency range.

➮Use the / buttons 7to adjust the sensitivity.

The display will show the current sensitivity value. “LO 3” means maximum sensitivity for short-range reception, while “LO 1” means minimum sensitivity.

➮Press the OK button 5to go up one

level in the menu or press the MENU button 8to exit the menu. The settings are now stored.

Sensitivity for long-range reception (S-DX)

➮Press the MENU button 8.

➮Press the soft key 4 with the display allocation “TUN”.

➮Press the soft key 4 with the display allocation “S-DX”.

➮Use the buttons 7 to select whether you want to set the sensitivity for the AM or FM frequency range.

➮Press the / buttons to adjust the sensitivity.

The display will show the current sensitivity value. “DX 3” means maximum sensitivity for long-range reception, while “DX 1” means minimum sensitivity.

➮Press the OK button 5to go up one

level in the menu or press the MENU button 8 to exit the menu. The settings are now stored.

Storing stations

Storing stations manually

➮Select the desired FM memory bank (FM1, FM2 FM3, FMT) or an AM mem- ory bank (AM or AMT).

➮Tune to the desired station as described in the section “Tuning to a station”.

➮Hold down one of the six soft keys, un- der which the station is to be stored, for longer than two seconds.

Storing stations automatically (“Travelstore”)

You can automatically store the six strongest stations in the region.These are stored in the FMT or AMT memory bank.

Note:

Any stations previously stored in the memory bank used will be deleted in the process.

To use the “Travelstore” function,

➮in radio mode, press the TUNE button

The Radio Function menu will appear on the display.

➮press the soft key 4 with the display allocation “TS”.

The “Travelstore” process will begin. “T- STORE” will appear on the display. Once the process is complete, the radio will be tuned to the station stored in memory slot 1 of the FMT or AMT memory bank.