Blaupunkt CD70 Subout/subwoofer, High-pass filter, Setting the high-pass filter

SUBOUT/SUBWOOFER HIGH-PASS FILTER

Subout/subwoofer

Setting the frequency and level for the subwoofer

You can set the frequency and amplifier level for a connected subwoofer. The settings you make depend on the hifi system in your car and the power of your subwoofer. Experiment to find your ideal setting.

➮Press the AUD button 9.

➮Press the soft key 4 with the display allocation “NEXT”.

➮Press the soft key 4 with the display allocation “SUB”.

➮Press the or button 7to select between the frequencies “80 Hz” and “100 Hz”.

➮Set the desired amplifier level using the or button 7.

➮Press the OK button 5 to return to the

previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.

High-pass filter

Setting the high-pass filter

If a subwoofer is connected to your car radio, you can use a high-pass filter (HP-F) to sup- press the output of lower frequencies through the internal final amplifier and an external pre- amplifier that may be connected. This filter has five adjustment levels. The settings de- pend on the unit installed in your car. Experi- ment to find your ideal setting.

➮Press the AUD button 9.

➮Press the soft key 4 with the display allocation “NEXT”.

➮Press the soft key 4 with the display allocation “HP-F”.

➮Press the or button 7 to switch the high-pass filter on/off.

When the high-pass filter is activated,

➮select the desired amplifier filter, “FIL-

TER1” - “FILTER5” using the or button 7.

➮Press the OK button 5to return to the

previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.

ENGLISH

35