Blaupunkt CD70 operating instructions DSA Digital Sound Adjustment, Switching DSA on/off

Page 30

DSA - DIGITAL SOUND ADJUSTMENT

DSA - Digital Sound

Adjustment

This unit is equipped with a digital sound-ad- justment system. This consists of three self- aligning, adaptable 7-band equalisers, a dy- namic noise covering system (DNC) and five sound presets.

The three 7-band equalisers (EQ1 - EQ3) are each allocated two channels (left and right). The equalisers EQ1 - EQ3 can be automati- cally lined up with the aid of the microphone supplied. The automatically read values can also be altered manually. You also have the option of setting the equalisers manually.

Switching DSA on/off

To switch the equaliser off,

press the DSA button 6.

The setting last selected appears on the dis- play.

Press the button 7.

“DSA OFF” appears on the display.

Press the DSA button 6. The settings are now stored.

To switch the equaliser back on again,

press the DSA button 6. “DSA ON” appears on the display.

Press the button 7.

The setting last selected appears on the dis- play before the equaliser is switched off.

Press the DSA button 6. The settings are now stored.

Lining up the equaliser automatically

You can line up the equalisers electronically for three different situations, and store these settings, e.g.:

EQ 1 for the driver alone

EQ 2 for the driver and front passenger EQ 3 for car occupants in front and back.

Hold the microphone in the appropriate posi- tion during line-up.

The position of the microphone for situation 1 (example, driver alone) is directly on a level with the driver’s head.

For situation 2, the microphone is between the driver and the front passenger.

For situation 3, the microphone should be in the middle of the vehicle interior (left/right, front/back).

It is a good idea to look for really peaceful surroundings for lining up the system. Out- side noises may distort the readings.

Note:

Output from the loudspeakers should not be impaired by objects. All loudspeakers must be connected up. The microphone must be connected to the car radio. Please line up the equaliser before you line up DNC.

To line up an equaliser,

press the DSA button 6;

select the desired equaliser using the / button 7;

press the soft key 4 with the display allocation “AUTO”;

A countdown starts on the display. During this time, you have the opportunity to position the microphone. Lining up then takes place when the countdown is over.

Proceed in the same way with all the equalisers.

30

Image 30
Contents San Francisco CD70 Open here Ouvrir s.v.p Por favor, abrir Favor abrir 14 13 Controls Table of Contents Accessories Road safetyInstallation GuaranteeRemoving the KeyCard Theft protection, KeyCardInserting the KeyCard Replacing / training KeyCardsOptical theft protection indicator LED Lost or damaged KeyCardsTraining a new KeyCard / entering the master code Switching on/off Changing settings Exiting the Install menuFirst use Setting the switch-on volume Volume adjustmentMute setting Setting the volume for the warning tone beepAudio settings Setting the display Setting the reading angleSetting the display brightness Switching the RDS function on and off Radio modeSwitching to radio mode Switching the AF function on and offTuning to a station Selecting short-/long-range receptionSetting station scanning sensitivity Storing stationsStoring stations automatically Travelstore Listening to preset stations Setting the scan timeRadio scan Programme type PTY Culture Travel Jazz Sport News POP Rock ClassicsOptimising radio reception Interference-related bandwidth selection SharxSelecting radio text display Switching between stereo and monoChanging the display Naming a stationRadio Mode CD Mode Repeating a track Repeat Programming favourite CD tracksNaming CDs Current input position flashesCD changer mode OptionalScanning all tracks on all CDs Scan Programming favourite CD tracks Setting the time Clock timeSwitching between 12- and 24-hour clock mode Permanent time display when unit is offDSA Digital Sound Adjustment Switching DSA on/offLining up the equaliser automatically Select sound preset Setting the equalisers manuallySelecting an equaliser Setting aid for the equaliser Sound impression/problem What to doDNC Dynamic Noise Switching DNC line-up on/offSetting the DNC increase CoveringSwitch-on delay for external pre- amplifier TMC for dynamic navigation systemsPre-amplifiers Subout/subwoofer Setting the frequency and level for the subwooferSetting the high-pass filter High-pass filterTechnical data External audio sourcesBlaupunkt-Werke GmbH Important notice for customers in USA San Francisco CD70
Related manuals
Manual 38 pages 51.59 Kb