Blaupunkt CD70 Setting the reading angle, Setting the display brightness

Page 13

DISPLAY

Setting the display

Display brightness - night

You can adjust the display to your needs and the position of the car radio in your vehicle.

Setting the reading angle

Press the MENU button 8.

Press the soft key 4 with the display allocation “DISP”.

Press the soft key 4 with the display allocation “ANGL”.

Set the reading angle using the or buttons 7.

Press the OK button 5 to return to the

previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.

Setting the display brightness

If your car radio has been connected as de- scribed in the instructions, the display bright- ness will be activated when you turn on the headlights.The display brightness can be set separately in stages from 1 - 9 for day and night.

Display brightness - day

Press the MENU button 8.

Press the soft key 4 with the display allocation “DISP”.

Press the soft key 4 with the display allocation “DAY”.

Set the brightness using the button

7.

Press the OK button 5 to return to the

previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.

Press the MENU button 8.

Press the soft key 4 with the display allocation “DISP”.

Press the soft key 4 with the display allocation “NGHT”.

Set the brightness using the button

7.

Press the OK button 5to return to the

previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.

ENGLISH

13

Image 13
Contents San Francisco CD70 Open here Ouvrir s.v.p Por favor, abrir Favor abrir 14 13 Controls Table of Contents Installation Road safetyAccessories GuaranteeInserting the KeyCard Theft protection, KeyCardRemoving the KeyCard Replacing / training KeyCardsLost or damaged KeyCards Optical theft protection indicator LEDTraining a new KeyCard / entering the master code Switching on/off Exiting the Install menu Changing settings First use Mute setting Volume adjustmentSetting the switch-on volume Setting the volume for the warning tone beepAudio settings Setting the reading angle Setting the displaySetting the display brightness Switching to radio mode Radio modeSwitching the RDS function on and off Switching the AF function on and offSelecting short-/long-range reception Tuning to a stationStoring stations Setting station scanning sensitivityStoring stations automatically Travelstore Setting the scan time Listening to preset stationsRadio scan Culture Travel Jazz Sport News POP Rock Classics Programme type PTYInterference-related bandwidth selection Sharx Optimising radio receptionChanging the display Switching between stereo and monoSelecting radio text display Naming a stationRadio Mode CD Mode Programming favourite CD tracks Repeating a track RepeatCurrent input position flashes Naming CDsOptional CD changer modeScanning all tracks on all CDs Scan Programming favourite CD tracks Clock time Setting the timePermanent time display when unit is off Switching between 12- and 24-hour clock modeSwitching DSA on/off DSA Digital Sound AdjustmentLining up the equaliser automatically Setting the equalisers manually Select sound presetSelecting an equaliser Sound impression/problem What to do Setting aid for the equaliserSetting the DNC increase Switching DNC line-up on/offDNC Dynamic Noise CoveringTMC for dynamic navigation systems Switch-on delay for external pre- amplifierPre-amplifiers Setting the high-pass filter Setting the frequency and level for the subwooferSubout/subwoofer High-pass filterExternal audio sources Technical dataBlaupunkt-Werke GmbH Important notice for customers in USA San Francisco CD70
Related manuals
Manual 38 pages 51.59 Kb