KeyCard anti-theft protection system

The unit is now also ready for operation with the new KeyCard.

A maximum of two KeyCards can be taught in.

If a third KeyCard is taught in, the card which is not employed for the teaching-in process of the new card automatically loses its va- lidity.

Displaying the radio passport data

You can use the KeyCard supplied to call up the radio passport data such as the unit name, type number (7 6 ...) and serial num- ber on the display.

Refer to “Programming with DSC – READ KC” for the procedure.

The unit is switched off; the control panel is open; the KeyCard is removed; LED ON is selected in the DSC menu (default factory setting).

If necessary, refer to “Programming with DSC – LED”.

Deactivating the flashing LED

Select “LED OFF” in the DSC menu to de- activate the flashing LED.

Care of the KeyCard

The KeyCard will function perfectly only if the contacts are kept free of foreign parti- cles. Avoid touching the contacts directly with your hands.

If necessary, clean the KeyCard contacts using a cotton bud soaked in alcohol.

Teaching in the new KeyCard

•Insert the new KeyCard and engage the control panel.

•Press ON.

•Press TU and ST1 within 5 seconds: “0000” appears on the display.

•Using the rocker, enter the four-digit master code from the car radio pass-

port:

/ - Enter the digits (press once for one, twice for two, etc.)

<< >> - Select the insertion point

•After entering the correct master code, press ENT.

The new KeyCard is accepted when the unit switches to play.

Input errors

Visual display for anti-theft protection

Anti-theft protection is provided in the form of a flashing LED ? when the vehicle is parked and the KeyCard removed.

The following conditions must be met: Battery positive and constant battery posi- tive are connected as described in the in- stallation instructions.

KeyCard lost/damaged

Should you damage or lose the KeyCard for your unit, you can teach in a new KeyCard. You can purchase the new KeyCard from your dealer. You will also require the mas- ter code for the unit, which can be found in the car radio passport.

Keep the car radio passport in a safe place, but not in the car.

Should the input not be correct, “CODE ERR” appears on the display. After three successive incorrect inputs, “WAIT 1h” ap- pears on the display. The unit remains in Wait mode for one hour.

•Switch the unit off and on again. Repeat the teach-in process.