Blaupunkt Dallas RMD 169 operating instructions Programming with DSC

Programming with DSC

The car radio offers the facility to adjust cer- tain settings and functions to your require- ments and to store these changes with the aid of DSC (Direct Software Control).

The default settings are selected at the fac- tory.

An overview of the factory default settings is provided below for future reference.

To alter a programming setting:

•Press DSC.

Select and adjust the functions described below by means of the rocker and the ENT key. The status of adjustment is shown on the display.

/ Select function

<< >> Adjust/call up value

ANGLE	Adjust the display to your		nates interference from ad-
	own viewing angle.		jacent stations.
			“SHARX ON” is the factory
DIM DAY	Select the display bright-		default setting.
	ness for daylight (Stages 1-
	9).	HICUT	Interference-driven treble
			reduction.
DIM NIGHT	Select the display bright-		Treble frequencies are re-
	ness for darkness (Stages		duced only when interfer-
	1-9).		ence is present. Can be se-
	The brightness is switched		lected from NO HICUT
	over automatically by the		(OFF) to HICUT 3 (strongest
	headlights.		treble reduction). Decide for
			yourself which setting is the
ON VOL	Select the initial volume.		most pleasant.
	Use << >> to select the de-
	sired initial volume.	FM/AM SENS
	If “LAST VOL” is selected,		Change the sensitivity of the
	the initial volume is the		seek run.
	same as that last selected.		“SENS 1” indicates close re-
			ception, “SENS 6” distant
PEAK ON/OFF			reception.
	Activate/deactivate the dy-		Select “SENS 1” if you wish
	namic volume level display.		to receive strong stations in
			the near range; select
SHARX	Automatic bandwidth switch-		“SENS 6” if you also wish to
	ing on the FM band.		receive weaker, distant sta-
	Where the station density is		tions.
	high, switch to SHARX ON
	with << >>: this largely elimi-

30