Blaupunkt Dallas RMD 169 Programming with DSC, Stereo/Mono, Clk Auto/Man, CDC Name, Beep

Programming with DSC

STEREO/MONO

Toggle << >>.

The display indicates the se- lected state briefly. STEREO is selected auto- matically when the unit is switched on.

AMP DELAY Energization delay of exter- nal amplifiers. DLAY OFF signifies no energization de- lay. DLAY 1 to DLAY 4 sig- nify the energization delay in seconds.

CLK AUTO/MAN

For activating/deactivating automatic hours correction. Refer also to “CLOCK time, hours correction”.

12/24H MODE

Select the time display (12-hour or 24-hour).

CLK ON/OFF The time can be displayed with the ignition on and the unit switched off. Select CLK ON in this case.

SCANTIME This setting defines the sampling time (5 - 30 sec- onds) for radio broadcasts and CD tracks.

AUX ON/OFF This menu item does not ap- pear when a CD changer is connected. “OFF” is the de- fault factory setting.

If an external unit is con- nected through AUX, “ON” must be selected.

LEARN KC This function enables you to teach in a second KeyCard.

ENGLISH

CDC NAME	Displayed only in CD replay	BEEP	Confirmation signal for func-
	mode.		tions which require a key to
	You can use this function to		be held down for approx. 1
	assign any desired name to		second.
	the CDs. (Refer to “Assign-		The volume can be selected
	ing names to CDs”.)		from 0 to 9 (0 = off).
CLOCKSET	Manual adjustment of the	LED ON/OFF You can select between
	time.		LED ON and LED OFF.
	Use << >> to select hours/		When LED ON is selected,
	minutes. The flashing range		the “ON” knob flashes to
	can be adjusted with / .		provide additional security
	Press ENT briefly to save		when the unit is switched off
	after completing the setting.		and the KeyCard removed.
	Refer also to “CLOCK time”.

Refer to the instructions un- der “KeyCard anti-theft pro- tection system”: “Teaching in a second KeyCard”.

READ KC The data can be read out from a KeyCard.

Unit data such as name, type number (76...) and seri- al number are displayed by the KeyCard supplied. Should you remove the Key- Card during the read pro- cess, “READ KC” appears in the display.

31