Blaupunkt Dallas RMD 169 MiniDisc mode/CD changer mode, Inserting a MiniDisc, MD text

Page 22

MiniDisc mode/CD changer mode

This unit enables you to play MiniDiscs. CDs can also be played with the aid of a Blau- punkt CDC A 06, A 072, A 08, A 05, A 071 or IDC A 09 CD changer.

These CD changers are available from your dealer.

Note:

Only use standard circular 12 cm diameter CDs in the CD changer.

8 cm diameter CDs or CDs with different shapes, e.g. of a butterfly or beer glass, are not suitable for playing.

Such CDs present a serious risk of damage to the CD and to the drive.

We can accept no liability for damage aris- ing from the use of unsuitable CDs.

Inserting a MiniDisc

Switch on the unit and disengage the control panel with knob 1.

The control panel drops forward.

Insert the MiniDisc with the label facing upwards in the direction indicated by the arrow. Do not use force.

The MiniDisc is automatically transported to the playing position. The MiniDisc is played.

Fold the control panel up on the left- hand side and engage.

Removing the MiniDisc

With the control panel disengaged, hold the Eject key (arrow) down for ap- prox. 1 second.

The MiniDisc is ejected.

Do not obstruct or assist automatic inser- tion or ejection of the MiniDisc, as the mech- anism may otherwise be damaged.

If the MiniDisc is not removed, it is drawn in again automatically after approx. 30 sec- onds.

For safety reasons, the control panel must always be engaged whilst the vehicle is moving.

Activating MiniDisc mode

AMiniDisc is inserted, “DISC-IN” appears on the display.

• Press MD.

MD text

The names of the MD and individual tracks can be displayed if they are stored on the MiniDisc.

Activating/deactivating MD text

Hold the DIS key down until a beep sounds. The text “MDTXT ON” or “NO MDTXT” is displayed.

Displaying the MD text

Press MD briefly.

Condition: SCROLL is set to OFF in the DSC menu. SCROLL ON causes the name to run across the display.

Refer to the “Programming with DSC - SCROLL” section.

22

Image 22
Contents Dallas RMD 169 US 13 12 Contents Condensed instructions Next AM, AMT Condensed instructionsNext FM BNDExit MIXDPE RPT RepeatCLR RockerDSC-MODE PTY Adjustment procedure Select modeParticular feature of loudness AUDDIS DisplayCDC = TU TunerRemote control RC Installation Read the following before using Telephone mute UnitTraffic safety AccessoriesRemoving the KeyCard Switching on the unitKeyCard anti-theft protection system Teaching in a second KeyCard/ replacing a KeyCardKeyCard anti-theft protection system Selecting the operating Enhancing display Mode Legibility Selecting the frequency band Radio operation with RDS Radio Data SystemAF alternative frequency Activating/deactivating RDSPaging through the transmis- sion chains FM only Station tuningRadio operation with RDS Radio Data System Changing the memory level FMSelecting sampled stations/terminating Preset Scan Sampling stored stations with Preset ScanStarting Preset Scan Calling up stored stations Changing the sampling time Scan Automatic bandwidth switching Sampling stations with Radio Scan Changing the sensitivity of the seek runNews Inform Sports Talk Rock CLS Rock Adlt HIT Soft Rock PTY Program TypeProgram type Country Oldies Soft Nostalga Jazz ClassicalSampling stations with PTY-SCAN Storing the program typePTY priority Inserting a MiniDisc MiniDisc mode/CD changer modeActivating MiniDisc mode Removing the MiniDiscSelecting tracks and CDs CDs only in CD changer mode MiniDisc mode/CD changer modeActivating CD changer mode Repeating tracks and CDs CDs only in CD changer modeClearing the TPM memory Storing tracks with TPMActivating/deactivating TPM replay MIX OFFSelecting MIX functions Assigning a name to CDs in CD changer mode onlyDeleting the CD name/TPM store using DSC-UPDATE Starting ScanClock Time Setting the timeDeactivating hours adjustment Displaying the timeAdjustment instructions Equalizer settingAdjusting the frequency level Selecting the preset sound setting Equalizer settingSelecting a quality factor for the bass or mid-range Lower mid-range Tips on adjusting the equalizerFrequency ranges Tonal effect/problem Measure Bass range Mid-rangeProgramming with DSC CLK AUTO/MAN Programming with DSCSTEREO/MONO CDC NameEnd DSC programming/store settings Technical dataOverview of the factory default settings with DSC AmplifierGlossary of technical terms Scan Glossary of technical termsSoftkey Software key Bosch Gruppe Dallas RMD 169 US Normas de seguridad GB Safety precautionsIndications de sécurité Indicações de segurança139 12V 141