Radio operation with RDS (Radio Data System)
Changing the memory bank (FM)
You can shift between the memory banks I,
IIand T in order to store stations and recall them later. The currently selected memory bank is indicated in the display.
•Press NEXT as often as necessary un- til the desired memory bank lights up in the display.
•Press the desired preset button until the radio resumes play after the mut- ing (takes approximately 2 seconds, confirmed by a beep).
Now the station has been stored.
Note:
Should you tune into a station which has already been stored before on another mem- ory bank, the corresponding preset button and the memory bank will flash briefly in the display.
has been completed, the radio will play the station with the strongest reception (ST 1).
If desired, stations can also be stored man- ually on the Travelstore bank (see “Storing stations”).
Recalling stored stations
You can recall any stored station at the touch of a button.
FM
Recall the stations on the waveband select- ed directly:
Storing stations
On FM, you can store six stations on the preset buttons ST1 - ST6 for each of the memory banks I, II and T.
On MW/LW, you can also store six stations each.
•Press TU, menu level 2 will appear in the display.
•Press BND to select the waveband.
•Use the rocker switch to tune into a station (either automatically 
/
or manually << >>).
Automatically storing the strongest stations with Travel- store
You can automatically store the six most powerful FM stations in your current recep- tion area sorted according to their signal strength. This function is particularly con- venient on longer trips.
•Press TU, menu level 2 will appear in the display.
•Press TS briefly.
The six strongest FM stations will be auto- matically stored on the memory bank T (Travelstore). If it is not possible to receive six stations, the remaining presets will be marked by four dashes. When this process
•by pressing ST1 - ST6.
To select a station on a different waveband:
•Press NEXT as often as necessary un- til the desired memory bank appears and then select the station by pressing ST1 - ST6.
MW, LW
You can select the stations stored for the selected waveband directly:
56