Blaupunkt SEATTLE RDM 169 Care of your KeyCard, Lost or damaged KeyCard, Training the new KeyCard

Page 15

KeyCard theft protection system

Care of your KeyCard

To ensure that the KeyCard will function properly it is important that the contacts are free from any foreign particles. Avoid direct skin contact.

If necessary, clean the KeyCard contacts using a cotton swab soaked in rubbing al- cohol.

Lost or damaged KeyCard

If the KeyCard for your unit is lost or dam- aged you can train a new KeyCard.

You can purchase the new KeyCard from any authorised dealer. You will also require the master code for the unit, which you will find in the radio pass.

Always keep the radio pass in a safe place. Do not leave it in your vehicle.

Training the new KeyCard

•Insert the new KeyCard into the unit and lock the operating panel into posi- tion.

•Press ON.

•Within the next 5 seconds, press TU and ST1. “0000” will appear in the dis- play.

•Now use the rocker switch to enter the four-digit master code in the radio pass:

/ - Enter digits (press as often as required)

<< / >> - Select the entry position.

•Press ENT after you have entered the correct master code.

The new KeyCard has been accepted when the unit switches to play.

Making mistakes in the entry

If you enter the wrong code, “CODE-ERR” will appear in the display. If you enter the wrong code three times, “WAIT 1h” will ap- pear in the display. The unit will switch to a standby mode for one hour.

•Switch the unit off and on again.

Repeat the steps to train the new KeyCard, but be sure to enter the correct master code.

52

Image 15

Contents Alabama DJ Seattle RDM Tokyo RDM 13 12 Table of contents Quick Reference BND Quick ReferenceNext FM Next AM MW, LWExit PTYMIX Rocker switch Radio operation RPT RepeatCLR AUD DSC-MODE PTYDisplay DIS= TU Tuner CDCSelect track RC 08 remote control unitV+ Volume control SRC Source Radio operation Station seek tuning upImportant notes Training a second KeyCard KeyCard theft protection systemPutting the unit into operation Removing the KeyCardDisplaying the radio pass data KeyCard theft protection systemShort Additional Memory Turn On Message T.O.MMaking mistakes in the entry Care of your KeyCardLost or damaged KeyCard Training the new KeyCardSelecting the operating Optimising display Mode Legibility Radio operation with RDS Radio Data System AF Alternative frequencyREG regional program Scrolling through the broadcast- ing networks FM only Station tuningRadio operation with RDS Radio Data System Selecting a wavebandChanging the memory bank FM Recalling stored stationsStoring stations Scanning stations with Radio Scan Scanning stored stations with Preset ScanProgram type Switching from stereo to monoAutomatic bandwidth adjust- ment Sharx PTY Program TypeStoring program types Checking the program type of the sta- tionDisplaying the selected program type Selecting a program typePTY priority Scanning stations with PTY ScanOn/off Switching the warning beep offTraffic information station reception with RDS-EON Traffic announcement priorityInserting a CD Switching on CD operationSwitching on CD changer opera- tion CD operation / CD changer operationRepeating tracks/CDs Selecting the display modeCD operation / CD changer operation Selecting CDs and titlesMIX OFF MIX CDEntering CD names Deleting CD names/TPM withTo stop the Scan function Displaying the clock Setting the clockCorrecting the clock after the power has been disconnected Clock TimeSetting the equaliser Assistance in setting your equaliser Setting the equaliserCD Name Sharx Hicut DSC programmingCLK AUTO/MAN 12/24H ModeDSC programming STEREO/MONOPeak ON/OFF To quit the DSC programming mode and store the adjustmentTuner DSC programming SpecificationsOverview of the DSC factory set- tings AmplifierGlossary Technical Terminology MuteREG Glossary Technical Terminology ScanSoftkey Software key CODE-ERR IndexScan CD IndexBlaupunkt-Werke GmbH