CD operation / CD changer operation
Selecting the display mode
You can select the desired display mode for CD and CD changer operation:
Selecting CDs and titles
You can use the rocker switch to conven- iently select CDs, tracks or passages. You cannot select CDs unless a CD changer has been connected.
Repeating tracks/CDs
You can repeat a track or a CD (in changer operation) as often as desired. Use the RPT key to select the following functions:
- REP TRCK = Repeat track | |
- | REP CD = Repeat CD (changer opera- |
| tion only) |
- | RPT OFF = Repeat function off |
• Press RPT as many times as neces- | |
| sary until you have selected the de- |
•Press DIS as often as necessary until
you have selected the desired display | << / >> | CD selection (changer operation only) | |
mode. |
| >> | Up: Press briefly |
| << | Down: Press briefly | |
|
| ||
“CD 10” | – The CD number (for | / | Track selection |
| changer operation only). | ||
“TRACK 13” – Track number |
| Upwards: Press briefly. | |
| CUE - fast advance (audible): Hold | ||
|
|
| |
“14:34” | – Clock |
| pressed down. |
“00:20” | – The elapsed playback time |
| Downwards: Press twice or as many |
| times as required. | ||
“VIVALDI” | – CD name |
| |
| To | ||
|
|
| REVIEW - fast reverse (audible): |
The CD name will not be displayed unless it |
| Hold pressed down. | |
has already been entered. |
|
| |
Please refer to the section on “Entering CD The rocker switch acts as a sequence switch so that you can skip over several CDs or
names”.
tracks if you press it repeatedly.
sired setting. |
The CD or the track will repeat until you press RPT to switch off the function with “RPT OFF”.
TPM
(Track Program Memory)
Use this feature to program and play your favourite CD tracks in CD and changer op- eration. Up to 30 CDs can be managed in the CD mode, up to 99 discs in the CDC mode, with a maximum of 40 tracks each. TPM can only be used in the mode it was stored in (CD or changer operation).
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
63