Blaupunkt RD 126 operating instructions Short Additional Memory S.A.M, Care of your KeyCard

Page 11

Switching the audio source

Short Additional Memory (S.A.M.)

The second KeyCard available from your specialised dealer offers you the possibility to read out any short information, which will be moved through the display, such as, for example, the phone number of your car deal- er or the emergency call number of your automobile association. Please refer to chapter “DSC programming - READ KC”. The freely selectable text with a maximum of 48 characters can be programmed by all dealers who have the required equipment available.

Turn On Message (T.O.M.)

Optical indication for extra security

Flashing KeyCard tongue

When the vehicle is stationary and the KeyCard removed, the KeyCard tongue can be switched to flash for extra anti-theft secu- rity.

For this it is necessary that the positive pow- er supply line and the permanent +12 V lead are connected such as described in the in- stallation instructions.

Be sure that “LED ON” is adjusted in the DSC mode.

If required, please refer to chapter “DSC programming - LED”.

Using the SRC button you can switch be- tween the following audio sources:

radio and

CD.

The CD mode is only available if a disc is inserted.

The second KeyCard available from your specialised dealer also allows you to dis- play a special turn-on message each time the radio is switched on.

The freely selectable text with a maximum of 48 characters can be programmed by all dealers who have the required equipment available.

The programmed text will be displayed each time you turn on your system with the sec- ond KeyCard.

Switching off the flashlight

The flashlight can be switched off by push- ing in the KeyCard and lock.

If you would like to deactivate the flashing tongue with general effect, adjust the rele- vant item in the DSC menu to “LED OFF”.

Care of your KeyCard

For a proper function of the KeyCard it is important that the contacts are free from any foreign particles. Avoid direct skin contact. If necessary, clean the KeyCard contacts using a cotton swab soaked with alcohol.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

33

Image 11
Contents Sevilla 10 11 Contents FMT Quick referenceDisplay Rocker switch Radio operationExtra rocker switch functions AUD D GEO C DSC Mode B PTYScan Preset ScanFlashing KeyCard tongue MIXEject @ 1, 2, 3, 4, 5, 6 preset buttons= AF SRC SourceExtra function AUD GEOAUD Extra function GEOTelephone mute Precautions Installation AccessoriesTraffic safety Important notesNever pull out the KeyCard directly KeyCard theft protection systemRemoving the KeyCard Replacing a KeyCardCare of your KeyCard Switching off the flashlightShort Additional Memory S.A.M Turn On Message T.O.M Optical indication for extra securityRadio operation with RDS Radio Data System Storing stations Manual tuning withScrolling through the broadcast- ing networks only FM Changing the memory bank FMTivity Gest stations with Travelstore Preset ScanSelecting the seek tuning sensi Changing the scan timeSport Switching from stereo to monoProgramme type PTY priority Storing programme typesScanning stations with PTY-SCAN On/off Receiving traffic programme stations with RDS-EONTraffic announcement priority To make a setting Automatic seek tuning startAdjusting GEO for traffic mes- sages and the warning beep Switching the warning beep offInserting a CD Selecting a title MIX playback Switching to CD operationSelecting the display mode Storing the display modeTo stop the Scan function DSC programmingScan operation Read KC AngleLearn KC BrightPTY Lang Overview of the DSC factory settingsSpecifications AppendixBlaupunkt telephone hotline Blaupunkt-Werke GmbH