Blaupunkt RD 126 Scrolling through the broadcast- ing networks only FM, Storing stations

Page 13

Seek tuning

Up Down

Down in short intervals (“AF” must be switched off) Up in short intervals (“AF” must be switched off)

Manual tuning with << >>

You can also tune in a station manually.

Condition:

AF and PTY must be switched off (i.e. the symbols do not light up in the display).

If necessary, deactivate these functions:

Press AF or PTY.

Manual tuning:

Press << >>; the frequency will change in short intervals in downwards or up- wards direction.

When holding the right or left part of the rock- er switch depressed, the frequency scan is speeded up.

Scrolling through the broadcast- ing networks (only FM)

You can use the << >> buttons to tune in stations of your reception area.

If several programmes of the broadcasting networks can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ...

For this it is necessary that the stations have been tuned in at least once and that “AF” is active (lights up in the display).

For this purpose, you may start Travelstore seek operation:

Press FMT for two seconds; the sys- tem starts to run through the frequency band.

If “AF” does not light up,

press AF.

With this, the requirements for selecting sta- tions with << >> are fulfilled.

Changing the memory bank (FM)

You can shift between the memory banks I,

IIand T in order to store stations and recall them later.

The currently selected memory bank is in- dicated in the display.

Press the FMT button as many times until the desired memory bank lights up in the display.

Storing stations

On FM, you can store six stations on the preset buttons 1-6for each of the memory banks I, II and T.

On MW/LW, you can store six stations each.

Select the appropriate waveband with FMT or M•L.

Tune in a station with the rocker switch (either automatically / or manually << >>).

Press the desired preset button until the radio resumes play after the mut- ing (takes approximately two seconds, confirmed by beep).

Now the station has been stored.

The activated preset button is indicated in the display.

Notice:

Should you tune in a station which has al- ready been stored before on another memory bank, the corresponding preset but- ton and the memory bank will briefly flash in the display.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

35

Image 13
Contents Sevilla 10 11 Contents FMT Quick referenceExtra rocker switch functions Rocker switch Radio operationAUD D GEO C DSC Mode B PTY DisplayFlashing KeyCard tongue Preset ScanMIX Scan= AF @ 1, 2, 3, 4, 5, 6 preset buttonsSRC Source EjectAUD GEOExtra function GEO Extra function AUDTraffic safety Precautions Installation AccessoriesImportant notes Telephone muteRemoving the KeyCard KeyCard theft protection systemReplacing a KeyCard Never pull out the KeyCard directlyShort Additional Memory S.A.M Switching off the flashlightTurn On Message T.O.M Optical indication for extra security Care of your KeyCardRadio operation with RDS Radio Data System Scrolling through the broadcast- ing networks only FM Manual tuning withChanging the memory bank FM Storing stationsSelecting the seek tuning sensi Gest stations with Travelstore Preset ScanChanging the scan time TivityProgramme type Switching from stereo to monoSport Scanning stations with PTY-SCAN Storing programme typesPTY priority Traffic announcement priority Receiving traffic programme stations with RDS-EONOn/off Adjusting GEO for traffic mes- sages and the warning beep Automatic seek tuning startSwitching the warning beep off To make a settingSelecting the display mode Selecting a title MIX playback Switching to CD operationStoring the display mode Inserting a CDScan operation DSC programmingTo stop the Scan function Learn KC AngleBright Read KCSpecifications Overview of the DSC factory settingsAppendix PTY LangBlaupunkt telephone hotline Blaupunkt-Werke GmbH