Blaupunkt RD 126 KeyCard theft protection system, Removing the KeyCard, Replacing a KeyCard

Page 10

KeyCard theft protection system

This car radio is supplied with one KeyCard

ERR” will appear in the display. In this case

• Press << or >>.

as standard, though it can also be operated

please do not make any further adjustments.

The display will switch to “CHANGE”.

with a second card.

The system will switch off after approximate-

• Push in the KeyCard. The card is re-

If you have lost your KeyCard or if it was

ly ten seconds.

leased and put in the proper position

damaged, you can buy a new one from your

When inserting another card type (e.g.

for being removed.

specialised dealer.

phone or credit card), the display will show

• Remove the first KeyCard and insert

When using two KeyCards, the settings

“WRONG KC” for approximately two sec-

stored on the first card will be adopted. How-

onds.

the new one while “CHANGE” is still

being displayed.

ever, you can individually store the follow-

Remove the wrong card and introduce the

After the display indication “READY” or

ing functions:

correct KeyCard.

 

Preset button assignments, bass, treble,

After the display indications “CARD ERR” “LEARN KC”,

balance and fader settings, Loudness, TA

or “WRONG KC”:

• press DSC.

(traffic announcement volume), beep vol-

• Press ON to turn on the set.

Now you can also use the new KeyCard for

ume.

 

operating your unit.

In addition, the settings activated before

Removing the KeyCard

A maximum of two cards can be used for

switching the radio off, such as the wave-

Never pull out the KeyCard directly!

the set.

band, station, TA priority, AF, REG ON/OFF,

When trying to “train” a third one, the ac-

SCANTIME, seek tuning sensitivity and VOL

First, slightly push in the KeyCard.

cess authorisation for the KeyCard not used

FIX will also remained stored.

This releases the card and puts it in the prop-

for the “training” process will be deleted

This ensures that you will find your basic

er position for being removed.

automatically.

settings re-adjusted automatically as soon

• Now you can pull it out.

 

as you have inserted your KeyCard.

“Training” a second KeyCard/

Displaying the radio pass data

Putting the unit into operation

Using the KeyCard supplied with your set

Replacing a KeyCard

you can have the radio pass data such as

 

 

• Turn on the set.

While operating the unit with the first

the model name, product number (7 6 ...)

Introduce the KeyCard into the slot

KeyCard, you can “train” a second one to

and serial number indicated on the display

with the contact area showing up

be also used with the set:

panel.

(KeyCard tongue sticking out).

• Insert the first KeyCard and turn on the

Please refer to chapter “DSC programming

The car radio is now ready for operation.

set.

- READ KC”.

If a wrong KeyCard is inserted, then “CARD • Press the DSC button and select “LEARN KC” with /.

32

Image 10
Contents Sevilla 10 11 Contents Quick reference FMTAUD D GEO C DSC Mode B PTY Rocker switch Radio operationExtra rocker switch functions DisplayMIX Preset ScanFlashing KeyCard tongue ScanSRC Source @ 1, 2, 3, 4, 5, 6 preset buttons= AF EjectExtra function GEO GEOAUD Extra function AUDImportant notes Precautions Installation AccessoriesTraffic safety Telephone muteReplacing a KeyCard KeyCard theft protection systemRemoving the KeyCard Never pull out the KeyCard directlyTurn On Message T.O.M Optical indication for extra security Switching off the flashlightShort Additional Memory S.A.M Care of your KeyCardRadio operation with RDS Radio Data System Changing the memory bank FM Manual tuning withScrolling through the broadcast- ing networks only FM Storing stationsChanging the scan time Gest stations with Travelstore Preset ScanSelecting the seek tuning sensi TivityProgramme type Switching from stereo to monoSport Scanning stations with PTY-SCAN Storing programme typesPTY priority Traffic announcement priority Receiving traffic programme stations with RDS-EONOn/off Switching the warning beep off Automatic seek tuning startAdjusting GEO for traffic mes- sages and the warning beep To make a settingStoring the display mode Selecting a title MIX playback Switching to CD operationSelecting the display mode Inserting a CDScan operation DSC programmingTo stop the Scan function Bright AngleLearn KC Read KCAppendix Overview of the DSC factory settingsSpecifications PTY LangBlaupunkt telephone hotline Blaupunkt-Werke GmbH