Blaupunkt RD 126 = Af, SRC Source, Eject, @ 1, 2, 3, 4, 5, 6 preset buttons, CD slot

Page 7

<TA (priority for traffic announcements) When “TA” lights up in the display, the system will play traffic stations only. Priority on/off: Press TA.

=AF

Radio operation

Alternative frequency during RDS op- eration:

When “AF” lights up in the display, the system will automatically seek a fre- quency offering better reception of the same RDS programme.

AF on/off: Press AF briefly.

Regional function on/off:

Press the AF button for approximately two seconds until you hear a beep. “REG-ON” or “REG-OFF” will appear in the display (see chapter REG - re- gional programme).

CD operation

To switch between the CD PLAY and TIME (playback time) display modes: Press AF briefly.

>PTY (Programme Type)

In the PTY mode, the preset buttons become programme type buttons. With each preset you can select one pro- gramme type, such as for example

NEWS, SPORT, POP MUSIC, EDU- CATE, etc.

?SRC

SRC (Source)

When having a CD inserted, you can switch between radio and CD opera- tion.

(Eject)

Hold down the button for approximate- ly two seconds (beep) and the CD will eject.

@1, 2, 3, 4, 5, 6 - preset buttons

On FM, you can store six stations for each of the memory banks I, II and T. On MW/LW, you can store six stations each.

To store a station: Press a preset button during radio operation and hold down until the set resumes play after the muting and you hear a beep.

To recall a station: Select the desired waveband. On FM, adjust the corre- sponding memory bank and press the relevant preset button briefly.

Extra function preset buttons

To store and recall a PTY programme type.

On FM, you can store and recall one programme type on/from each preset button when PTY is active (“PTY” lights up in the display).

ACD slot

When inserting a disc with the label side facing up, it will be pulled in auto- matically and transported to the play- back position. CD playback is adjusted automatically.

BDSC (Direct Software Control) Use the DSC function to customise certain programmable, basic settings

to suit your personal needs and prefer- ences. See chapter “DSC program- ming” for more information.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

29

Image 7
Contents Sevilla 10 11 Contents FMT Quick referenceDisplay Rocker switch Radio operationExtra rocker switch functions AUD D GEO C DSC Mode B PTYScan Preset ScanFlashing KeyCard tongue MIXEject @ 1, 2, 3, 4, 5, 6 preset buttons= AF SRC SourceExtra function AUD GEOAUD Extra function GEOTelephone mute Precautions Installation AccessoriesTraffic safety Important notesNever pull out the KeyCard directly KeyCard theft protection systemRemoving the KeyCard Replacing a KeyCardCare of your KeyCard Switching off the flashlightShort Additional Memory S.A.M Turn On Message T.O.M Optical indication for extra securityRadio operation with RDS Radio Data System Storing stations Manual tuning withScrolling through the broadcast- ing networks only FM Changing the memory bank FMTivity Gest stations with Travelstore Preset ScanSelecting the seek tuning sensi Changing the scan timeProgramme type Switching from stereo to monoSport Scanning stations with PTY-SCAN Storing programme typesPTY priority Traffic announcement priority Receiving traffic programme stations with RDS-EONOn/off To make a setting Automatic seek tuning startAdjusting GEO for traffic mes- sages and the warning beep Switching the warning beep offInserting a CD Selecting a title MIX playback Switching to CD operationSelecting the display mode Storing the display modeScan operation DSC programmingTo stop the Scan function Read KC AngleLearn KC BrightPTY Lang Overview of the DSC factory settingsSpecifications AppendixBlaupunkt telephone hotline Blaupunkt-Werke GmbH