Blaupunkt RD 126 Appendix, Overview of the DSC factory settings, Specifications, PTY Lang

PTY LANG	To select the programme
	type language:
	DEUTSCH or ENGLISH
SCANTIME	Use this function to set the
	scan time for the radio or
	CD player from between five
	and 30 seconds.
S-DX	To adjust the seek tuning
	sensitivity for distant recep-
	tion.
	DX 1 - high sensitivity
	DX 3 - low sensitivity
S-LO	To adjust the seek tuning
	sensitivity for local recep-
	tion.
	LO 1 - high sensitivity
	LO 3 - low sensitivity
	The seek tuning sensitivity
	values can be separately set
	for AM and FM.

VOL FIX Use this function to select the volume at which the ra- dio is set when it is switched on. Adjust the desired vol- ume level with << >>. When adjusted to “VOL 0”, the system will come on with the volume selected before switching the radio off.

To quit the DSC programming mode and store the adjustment:

•Press DSC.

Overview of the DSC factory settings

LOUDNESS	3
TA VOL	35
SPEECH	0
BEEP	4
ANGLE	0
BRIGHT	16
LED	ON
LEARN KC	-
READ KC	-
PTY LANG	ENGLISH
SCANTIME	10 sec.
S - DX	1
S - LO	1
VOL FIX	0

Appendix

Specifications

Amplifier
Output power:		4 x 23 W RMS power
		acc. to DIN 45324 at
		14.4 V
		4 x 35 W max. power
Tuner
Wavebands:
FM	:	87.5 – 108 MHz
MW	:	531 – 1602 kHz
LW	:	153 – 279 kHz
FM sensitivity:		0.9 ∝V at 26 dB signal-
		to-noise ratio

FM frequency response:

30 - 16 000 Hz

CD player

Frequency response:

20 - 20 000 Hz

Subject to modifications!

44