Tape operation, Inserting a tape, Prog selector

Tape operation

Inserting a tape

•Turn on the set.

•Insert a tape.

Insert the tape with side A or 1 showing up, the open side facing to the right.

Fast Forward/Rewind

Fast Forward

•Press FF.

At the end of a tape side, the mecha- nism changes directions automatically to play the other side.

Stopping Fast Forward operation

•Press FR.

PROG selector

(To change the tape direction during cassette playback)

•Press FR and FF simultaneously.

At the end of a tape side, the mechanism changes directions automatically to play the other side (Autoreverse). The display shows “TR1-PLAY” for track (side) 1 or A or “TR2- PLAY” for track 2 or B.

= Press to eject the tape.

The tape will be played in the direction used last.

“TR1-PLAY” in the display means that track 1 or A is being played.

Fast Rewind

•Press FR.

At the beginning of the tape, the me- chanism will automatically start play- back.

Stopping Fast Rewind operation

•Press FF.

Notice:

If there is too much tension on the tape during playback, the set may switch over by itself before having reached the end of the tape side. In this case check the condition of the cassette tape. Sometimes it helps to rewind it completely.

Removing a tape

•Press .

The cassette will eject.

To switch to the other side of the cassette tape:

Press both buttons simultaneously.

The display shows TR1-PLAY or TR2-PLAY.

Fast winding

FR : Fast rewind; stop by pressing FF.

FF : Fast forward; stop by pressing FR.