Blaupunkt RCR 126 operating instructions Re-start following an interrup, Tion of the power supply

further attempts, the waiting time extends to	Now the security coding system is active.
one hour.	The display will briefly show “CODE” each
After 20 unsuccessful attempts, the display	time the set is turned on.
will show “SERVICE”. In this case you can no

longer re-start the unit.	Re-start following an interrup-
Notice:	tion of the power supply
	(coding system is activated)
Keep your car radio passport with the code
	• Turn on the radio.
number in a safe place in order to avoid
“unauthorised access” to your car radio.	The display shows “CODE”.
When the security code system is activated,	• Briefly press preset button 1; the dis-
the unique code must be entered each time	play shows “0000”.
the power to the unit was interrupted.	• Enter the code number given in the
The radio will function again as soon as you
	Blaupunkt car radio passport:
have entered the correct code.
	Example: The code number is 2521.
If you have lost your radio passport and
	-	Press preset button 1 twice; the dis-
forgotten the code number, your radio can
		play shows “2000”.
only be made operable again by one of our
	-	Press preset button 2 five times; the
authorised service workshops (subject to
		display shows “2500”.
payment).
	-	Press preset button 3 twice; the dis-
Switching on security coding		play shows “2520”.
	- Press preset button 4 once; the dis-
To activate the coding system:		play shows “2521”.
• Turn off the radio.	• To confirm the code number:
	Press the upper part of the rocker

• Press preset buttons 1 and 4 simulta-	switch .
neously and hold down while switching
the set on again.	If you have entered the correct code, the unit
The display briefly shows “CODE” and the will now be ready for use.
unit will switch on.
• Release preset buttons 1 and 4.

If the display shows “CODE ERR”, you have entered a wrong code. Re-enter the correct code after the waiting time (“CODE” will ap- pear in the display).

If you switch off the set while it is blocked, the waiting time will start anew as soon as the radio is turned on again.

Switching off security coding

•Turn off the radio.

•Press preset buttons 1 and 4 simulta- neously and hold down while switching the set on again.

The display shows “CODE”.

•Now enter the code number to be found in the car radio passport and confirm (see example under “Re-start ...”).

Security coding is now switched off.

Optical indication for extra security

To indicate that your unit is equipped with security coding, you may let an LED installed in the non-detachable part of the front panel flash for extra security when the car is statio- nary.

For this, the following requirements must be fulfilled:

24