Blaupunkt RCR 126 operating instructions Important notes, Precautions, Traffic safety

Page 7

BRELEASE / CODE-LED Release panel - detachable face. For extra anti-theft protection, you should take the detachable face with you when leaving your car.

To remove it: Press RELEASE.

To re-install the panel: Insert on the left side first with the cassette slot facing up and then press on the right until the panel locks in.

Code LED

May flash for additional theft protection when the car radio is switched off, pro- vided this feature has been adjusted correspondingly via DSC (see DSC CODE-LED).

CRocker switch Seek tuning

Up

Down

/ Up/down in short intervals (“AF” must be switched off)

/ To scroll through the broadcasting network when “AF” is activated (e.g. NDR1 ... NDR4).

Extra functions:

In the DSC mode:

Select and programme DSC functions.

Coding: Enter code and confirm with .

Important notes

Precautions

Before starting to use your new car radio, please read the information on “Traffic safe- ty” and “Anti-theft protection” carefully.

Traffic safety

As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you.

Please keep in mind that you travel a di- stance of 14 m per second at a speed of only 50 km/h.

Should the traffic situation become particu- larly demanding, we advise you not to use the radio.

Always make sure that you are still able to hear any warning signals coming from outsi- de of the vehicle, such as police or fire engine sirens, so that you can react accordingly.

Therefore, you should always select a mode- rate volume for playing your car radio while you are driving.

22

Image 7
Contents Bologna RCR Deutsch Contents Short instructions On Off VolumeTo alter a setting Adjusted value is indicatedTape operation Lo/dxDisplay Radio operation= PS 3, 4, 5, 6 preset buttonsTo switch over Prog button/Fast windingTraffic safety PrecautionsImportant notes Security code Installation/ConnectionAnti-theft protection Release panelRe-start following an interrup Tion of the power supplySwitching on security coding Switching off security codingREG regional programme Radio operation with RDS Radio Data SystemAF Alternative frequency Scrolling through the broad- casting network only FM Automatic tuningManual tuning Selecting a wavebandStoring stations To start Preset ScanRecalling stored stations To start the scan Selecting the seek tuning sensi- tivitySwitching from stereo to mono FM Scanning stations with Radio-ScanReceiving traffic programme stations with RDS-EON Automatic seek tuning startSwitching the warning beep off To switch the warning beep off, proceed as described aboveProg selector Tape operationInserting a tape Fast Forward/RewindLED code DSC programmingCare notes Overview of the DSC factory settingsSpecifications AppendixBlaupunkt-Werke GmbH
Related manuals
Manual 16 pages 11.75 Kb