Blaupunkt RCR 126 Prog button/Fast winding, = Ps, 3, 4, 5, 6 preset buttons, @ Ml, To switch over

Page 6

;PROG button/Fast winding

To switch to the other side of the cassette tape:

Press both buttons simultaneously.

The display shows TR1-PLAY or TR2-PLAY.

Fast winding

FR : Fast rewind; stop by pressing FF.

FF : Fast forward; stop by pressing FR.

<SC

Radio operation

Scan (sampling all stations to be recei- ved): Press SC briefly.

=PS

Preset Scan (sampling all stations stored on the preset buttons): Press PS briefly.

>1, 2, 3, 4, 5, 6 - preset buttons

You can store six stations on each FM memory bank (I, II, T).

To store a station: Press button during radio operation and hold down until the radio resumes play.

To recall a station: Select the wave- band and on FM also the desired me- mory bank (press FMT button as many times as required). Then press the cor- responding preset button briefly.

Extra function:

Coding: Read chapter “Anti-theft pro- tection” first.

Buttons 1, 2, 3, 4 - To enter the four- digit code.

Press each of the buttons as many times as required until the code number given in the car radio passport stands in the display.

?TA (priority for traffic announcements)

If “TA” is displayed, the system will play traffic stations only.

TA on/off: Press button.

@M•L

To select the MW or LW waveband. Press button as many times until the desired band is adjusted.

AFMT - FM, Travelstore

To switch between the FM memory banks I, II and “T” (Travelstore).

To switch over:

Press FMT as many times until the desired bank is indicated in the display. To store the six most powerful stations automatically with Travelstore:

Store: Press FMT; seek tuning starts.

Recall: Press FMT as many times until the display shows “T”. Then briefly press one of the preset buttons 1, 2, 3, 4, 5, or 6.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

21

Image 6
Contents Bologna RCR Deutsch Contents Adjusted value is indicated On Off VolumeTo alter a setting Short instructionsRadio operation Lo/dxDisplay Tape operationProg button/Fast winding 3, 4, 5, 6 preset buttonsTo switch over = PSPrecautions Traffic safetyImportant notes Release panel Installation/ConnectionAnti-theft protection Security codeSwitching off security coding Tion of the power supplySwitching on security coding Re-start following an interrupRadio operation with RDS Radio Data System REG regional programmeAF Alternative frequency Selecting a waveband Automatic tuningManual tuning Scrolling through the broad- casting network only FMTo start Preset Scan Storing stationsRecalling stored stations Scanning stations with Radio-Scan Selecting the seek tuning sensi- tivitySwitching from stereo to mono FM To start the scanTo switch the warning beep off, proceed as described above Automatic seek tuning startSwitching the warning beep off Receiving traffic programme stations with RDS-EONFast Forward/Rewind Tape operationInserting a tape Prog selectorDSC programming LED codeAppendix Overview of the DSC factory settingsSpecifications Care notesBlaupunkt-Werke GmbH
Related manuals
Manual 16 pages 11.75 Kb