Blaupunkt RCR 45 Scrolling through the broad- casting network only FM, Storing stations

Automatic tuning

Up

Down

/ Up/down in short intervals (“AF” must be switched off)

/ To scroll through the broadcasting network when “AF” is activated (e.g. NDR1 ... NDR4).

Manual tuning << >>

(prerequisite: AF is switched off!)

•Press << >>; the frequency will change in short intervals in downwards or up- wards direction.

When holding the right or left part of the rocker switch pressed down, the frequency scan is speeded up.

Scrolling through the broad- casting network (only FM)

You can use the << >> buttons to tune in stations of your reception area.

If several programmes of one broadcasting network can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY (North German broad- caster).

For this it is necessary that the stations have been received at least once and that “AF” has been activated before (lights up in the dis- play).

For this purpose, you may start Travelstore seek operation:

•Press FMT for 2 seconds; the system starts to run through the frequency band.

If “AF” does not light up,

•press AF.

With this, the requirements for selecting sta- tions with << >> are fulfilled.

Changing the memory bank (FM)

You can shift between the memory banks I, II and T in order to store stations and recall them later.

The currently selected memory bank is indi- cated in the display.

•Press the FMT button as many times until the desired memory bank lights up in the display.

Storing stations

On FM, you can store six stations on the preset buttons 1 to 6 for each of the memory banks I, II and T.

On MW/LW, you can store six stations each.

•Select the waveband with FMT or M•L and on FM also the desired memory bank (with FMT).

•Tune in a station with the rocker switch (either automatically or manually).

•Press the desired preset button until the radio resumes play after the muting (takes approximately 2 seconds, confir- med by beep).

Now the station has been stored.

The activated preset button is indicated in the display.

Notice:

Should you tune in a station which has alrea- dy been stored before, the corresponding preset button and the memory bank will briefly flash in the display if you have selected another memory bank.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

25