•Press the KeyCard in, which releases the card and puts it in the proper positi- on for being removed.
•Remove the first KeyCard and insert the new one while “CHANGE” is still being displayed.
Now you can also use the new KeyCard for operating your unit.
A maximum of two cards can be used per set. When trying to “define” a third one, the sy- stem will automatically delete the access authorisation of that KeyCard which was not used for the “learning” process.
Optical indication for extra security
When the car is stationary, the KeyCard tongue can be switched to flash for extra anti- theft security.
For this, the following requirements must be fulfilled:
Permanent 12 V supply and the + ignition lead must be connected correctly (as illustra- ted in the installations instructions).
“LED 1” must be adjusted in the DSC mode. Please refer to chapter “DSC programming - LED”.
ITALIANO FRANÇAIS ENGLISH DEUTSCH
Displaying the radio pass data
You can use the KeyCard supplied with the unit to display the individual radio pass data such as the model name, the type number (7 6 ...) and the serial number:
•Press and hold down preset buttons 1 and 6 while switching on the unit.
•Press the M•L button within 2 seconds. The radio pass data will move through the display several times.
To quit the function:
•Press any button.
NEDERLANDS SVENSKA
ESPAÑOL PORTUGUÊS
23