Switching from stereo to mono (FM)
If reception is poor, you may get better sound quality by switching to mono:
•Press the lo button for approximately 2 seconds.
With mono playback, the stereo sign 
will disappear from the display.
Each time the radio is switched on, stereo playback is activated.
The unit will automatically switch to mono if the received signal is not strong enough for stereo playback.
Receiving traffic programme stations with RDS-EON
Many FM broadcasters offer traffic messa- | When pressing TA while a message is being | ||
ges for their service area at regular intervals. | broadcast, this message will be interrupted. | ||
All traffic programme stations transmit a spe- | The unit will then switch back to the previous | ||
cial carrier signal alongside their program- | condition. The priority for other traffic messa- | ||
mes, which is decoded by your car radio. If | ges remains active. | ||
this signal is identified, “TP” will appear in the |
|
| |
display (Traffic Programme). | Warning beep | ||
In addition to these, there are also stations | If you leave the reception area of the traffic | ||
which do not actually transmit traffic pro- | |||
grammes themselves, but by using RDS- | programme station currently tuned into, you | ||
will hear a warning beep after approximately | |||
EON they offer the possibility to receive the | |||
30 seconds. | |||
traffic messages broadcast by another traffic | |||
This alarm tone will also be released when | |||
programme station in the same radio net- | |||
pressing a preset button which has no traffic | |||
work. If you listen to one of these stations | |||
programme allocated to it. | |||
(e.g. NDR3), “TP” will appear in the display | |||
provided the priority for traffic programme | Switching the warning beep off | ||
stations has been activated, i.e. “TA” must be | |||
displayed. | a) Tune into another station offering traffic | ||
If a traffic announcement is broadcast, the | information: | ||
radio will automatically switch to the linked | • Press the rocker switch or | ||
traffic programme station (in this case, NDR2) | • | a preset button which has a traffic | |
for the duration of the message and return to | |||
| programme station allocated to it. | ||
the original programme (NDR3) afterwards. |
| ||
Alternatively: | |||
| |||
Traffic announcement priority | b) Switch off the priority for traffic an- | ||
nouncements: | |||
on/off | |||
• | Press TA. | ||
If the priority for traffic announcement pro- | |||
| “TA” will disappear from the display. | ||
grammes is activated, “TA” will light up in the display.
To switch the priority on or off:
• Press the TA button.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS