Blaupunkt RCR 127 To switch over, Travelstore, 3, 4, 5, 6 preset buttons, SRC Source

Page 6

7FMT (Freiburg RCR 127, Colorado RCR 127)

BND (Montreux RCR 127)

For selection of the FM memory banks I, II and T (Travelstore).

To switch over:

Press button repeatedly.

The selected memory bank will appear in the display.

Travelstore

To store and recall the six most power- ful stations with Travelstore.

To store: Press button for approxi- mately 1 sec. until you hear a beep and “T-STORE” appears in the display. To recall: Select the memory bank “T” and press the corresponding preset button (1-6) briefly.

Montreux RCR 127:

Additional selection of medium- and long-wave stations, provided that “AM ON” has been adjusted in the DSC menu.

8AF

Alternative frequency during RDS op- eration:

When “AF” lights up in the display, the system will automatically seek a fre- quency offering better reception of the same RDS programme.

AF on/off: Press AF briefly.

Regional function on/off:

Press the AF button for approximately 1 sec. until you hear a beep. “REG- ON” or “REG-OFF” will appear in the display (see chapter REG - regional programme).

9TA (priority for traffic announcements) When “TA” lights up in the display, the system will play traffic stations only. Priority on/off: Press TA.

:1, 2, 3, 4, 5, 6 - preset buttons

You can store six stations for each of the memory banks I, II and T.

To store a station: Press a preset button during radio operation and hold down until the set resumes play after the muting and you hear a beep.

To recall a station: Select the desired memory bank and press the relevant preset button briefly.

Extra function of preset buttons To store and recall a PTY programme type.

When PTY is active (“PTY” lights up in the display), you can store and recall one programme type on/from each preset button on FM.

;SRC (Source)

You can switch between the radio and tape audio sources (if a tape is insert- ed).

<lo

To switch the seek tuning sensitivity level:

Press button briefly.

If “lo” is displayed, the radio will only pick up strong, local stations (normal sensitivity).

If “lo” does not light up, the radio will also pick up weaker, distant stations (high sensitivity).

Extra function of lo button:

To switch between mono and stereo reception:

Press button for approximately 1 sec. (beep).

The selected condition will be briefly displayed.

26

Image 6
Contents Freiburg RCR Montreux RCR Colorado RCR 13 12 Contents Switching on/off via the ignition Switching on/off with the on button Press onSwitching on with the ignition being switched off Quick referenceDisplay Extra rocker switch functionsDSC Mode a KeyCard theft protection systemTravelstore To switch over3, 4, 5, 6 preset buttons SRC SourceCassette loading slot Preset ScanExtra function ? SCInstallation PrecautionsTraffic safety AccessoriesKeyCard theft protection system Short Additional Memory S.A.M Care of your KeyCardTurn On Message T.O.M Radio operation with RDS Radio Data System REG regional programmeAF Alternative frequency Station tuning Automatic tuningManual tuning with Storing stations Scanning stored stations with Preset ScanChanging the memory bank Recalling stored stationsScanning stations with Radio- Scan Switching from stereo to monoSelecting the seek tuning sensi- tivity LoudnessChecking the programme type of the station Displaying the selected programme typeSelecting a programme type Storing programme types PTY priority Scanning stations with PTY-SCANTraffic announcement priority Automatic seek tuning startReceiving traffic programme stations with RDS-EON On/offInserting a tape Tape operationFast Forward/Rewind Removing a tapeListening to the radio during fast tape winding with RM Care notesDSC programming AM on / OFF Montreux RCRTo quit the DSC programming mode and store the adjustment Overview of DSC factory set- tingsAmplifier SpecificationsAppendix TunerBlaupunkt-Werke GmbH
Related manuals
Manual 20 pages 24.65 Kb Manual 19 pages 21.39 Kb