Blaupunkt RCR 127 Checking the programme type of the station, Selecting a programme type

Page 15

The letters printed in bold are identical to the actual short-time indication in the dis- play.

NEWS

CURRENT AFFAIRS

INFORMATION

SPORT

EDUCATE

DRAMA

CULTURE

SCIENCE

VARIED

POP MUSIC

ROCK MUSIC

M.O.R. M (middle of the road music) LIGHT M (light classical) CLASSICS (serious classical) OTHER M (other music)

WEATHER

FINANCE

CHILDREN’S PROGRAMMES

SOCIAL AFFAIRS

RELIGION

PHONE IN

TRAVEL

HOBBIES

JAZZ MUSIC

COUNTRY MUSIC

NATIONAL MUSIC

OLDIES MUSIC

FOLK MUSIC

DOCUMENTARY

ALARM TEST (for service only)

Checking the programme type of the station

Press PTY for approximately 1 sec.

After the beep tone the display will show the programme type offered by the tuned in sta- tion.

If “NONE” appears in the display, the cur- rent station has no PTY code.

Displaying the selected programme type

Press << or >>.

The programme type selected last will be displayed briefly.

Selecting a programme type

a)Using the preset buttons

When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory.

Press one of the presets 1-6. The selected programme type will be displayed for 2 seconds.

If you wish to listen to a station with this PTY,

press / to start seek tuning.

If the system is unable to find a station of- fering the selected programme type, the dis- play will show “NO PTY” and a beep tone will be released. The station received be- fore starting seek tuning will be tuned in. You can assign different programme types to each preset position. Please refer to chap- ter “Storing programme types”.

b)Using the << >> buttons of the rocker switch

When PTY is switched on, you can se- lect a programme type using buttons << >>.

Press << or >>; the programme type selected last will be displayed for 3 seconds.

During this period press >> (for- wards) or << (backwards) to select the desired type.

Press << or >> as many times as required.

If you wish to listen to a station offering the selected PTY,

press / to start seek tuning.

If the system is unable to find a station of- fering the selected programme type, the dis- play will show “NO PTY” and a beep tone will be released. The station received be- fore starting seek tuning will be tuned in.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

35

Image 15
Contents Freiburg RCR Montreux RCR Colorado RCR 13 12 Contents Quick reference Switching on/off with the on button Press onSwitching on with the ignition being switched off Switching on/off via the ignitionKeyCard theft protection system Extra rocker switch functionsDSC Mode a DisplaySRC Source To switch over3, 4, 5, 6 preset buttons Travelstore? SC Preset ScanExtra function Cassette loading slotAccessories PrecautionsTraffic safety InstallationKeyCard theft protection system Short Additional Memory S.A.M Care of your KeyCardTurn On Message T.O.M Radio operation with RDS Radio Data System REG regional programmeAF Alternative frequency Station tuning Automatic tuningManual tuning with Recalling stored stations Scanning stored stations with Preset ScanChanging the memory bank Storing stationsLoudness Switching from stereo to monoSelecting the seek tuning sensi- tivity Scanning stations with Radio- ScanChecking the programme type of the station Displaying the selected programme typeSelecting a programme type Scanning stations with PTY-SCAN Storing programme types PTY priorityOn/off Automatic seek tuning startReceiving traffic programme stations with RDS-EON Traffic announcement priorityRemoving a tape Tape operationFast Forward/Rewind Inserting a tapeCare notes Listening to the radio during fast tape winding with RMAM on / OFF Montreux RCR DSC programmingOverview of DSC factory set- tings To quit the DSC programming mode and store the adjustmentTuner SpecificationsAppendix AmplifierBlaupunkt-Werke GmbH
Related manuals
Manual 20 pages 24.65 Kb Manual 19 pages 21.39 Kb