Blaupunkt RCR 127 operating instructions KeyCard theft protection system

This car radio is supplied with one KeyCard

The system will switch off after approximate-

• Push in the KeyCard. The card is re-

as standard, though it can also be operated

ly 10 seconds.

leased and put in the proper position

with a second card.

When inserting another card type (e.g.

for being removed.

If you have lost your KeyCard or if it was

phone or credit card), the display will show

• Remove the first KeyCard and insert

damaged, you can buy a new one from your

“WRONG KC” for approximately 2 seconds.

the new one.

specialised dealer.

The set will switch off automatically.

After the display indication “READY” or

When using a second KeyCard, the basic

Remove the wrong card and introduce the

“LEARN KC”,

settings will be adopted. However, you can

correct KeyCard.

• press DSC.

individually store the following functions:

• Press ON to turn on the set.

Now you can also use the new KeyCard for

Bass, treble, balance and fader settings,

operating your unit.

Loudness, TA (traffic announcement vol-

Removing the KeyCard

A maximum of two cards can be used for

ume), beep volume, mute volume, lo or dx,

the set.

PTY functions.

Never pull out the KeyCard directly!

When trying to “train” a third one, the ac-

In addition, the settings activated before

• First, slightly push in the KeyCard.

cess authorisation for the KeyCard not used

switching the radio off, such as the station

This releases the card and puts it in the prop-

for the “training” process will be deleted au-

tuned in, TA priority, AF, AM ON/OFF and

er position for being removed.

tomatically.

RM ON/OFF will also remained stored.

• Now you can pull it out.

This ensures that you will find your basic

Displaying the radio pass data

settings re-adjusted automatically as soon

“Training” a second KeyCard/

as you have inserted your KeyCard.

Using the KeyCard supplied with your set

Replacing a KeyCard

Putting the unit into operation

While operating the unit with the first Key-

you can have the radio pass data such as

the model name, product number (7 6..) and

• Turn on the set.

Card, you can “train” a second one to be serial number indicated on the display pan-

also used with the set:

el.

With the KeyCard tongue sticking out,

• Insert the first KeyCard and turn on the

Please refer to chapter “DSC programming

introduce the KeyCard into the slot

set.

- READ KC”.

with the contact area showing up.

• Press the DSC button and select

The car radio is now ready for operation.

“LEARN KC” with / .

If a wrong KeyCard is inserted, then “CARD

ERR” followed by “WAIT” will appear in the

• Press << or >>.

display. In this case please do not make any

The display will switch to “CHANGE”.

further adjustments.