Changing the memory bank, Storing stations

Changing the memory bank

You can shift between the memory banks I,

IIand T in order to store stations and recall them later.

The currently selected memory bank is in- dicated in the display.

• Press the FMT or BND button as many times until the desired memory bank lights up in the display.

Storing stations

On FM, you can store six stations on the preset buttons 1-6for each of the memory banks I, II and T.

On MW/LW, you can also store six stations each. (only with Montreux RCR 127)

• Select the desired memory bank.

Notice:

Should you tune in a station which has al- ready been stored before, then the corre- sponding preset position and memory bank will briefly flash in the display.

Automatically storing the strongest stations with Travel- store

You can automatically store the six most powerful FM stations of your current recep- tion area sorted according to their signal strength. This function is particularly conven- ient on longer trips.

•Press the FMT or BND button for 1 sec.

“T-STORE” will appear in the display.

Recalling stored stations

You can recall any stored station at the touch of a button.

•Select the memory bank with FMT or BND.

•Press the corresponding preset button briefly to recall the station.

Scanning stored stations with Preset Scan

You can have all of the stored stations briefly scanned on all wavebands.

To start Preset Scan:

•Press SC for approximately 1 sec.

All of the stored stations to be received will be scanned one after the other.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS

• Tune in a station with the rocker switch

(either automatically or manually).

• Press and hold down the desired pre-

set button until the radio resumes play

after the muting (takes approximately 1

sec., confirmed by beep).

Now the station has been stored.

The activated preset button is indicated in the display.

	The six strongest FM stations will be auto-	To select a scanned station and switch
	matically stored on the memory bank “T” off Preset Scan:
	(Travelstore). When this process has been	• Press SC briefly.
	completed, the radio will play the first sta-	• Press SC briefly.
	completed, the radio will play the first sta-
	tion stored on preset 1.	Note:
	If desired, stations can also be stored man-	Note:
	If desired, stations can also be stored man-	If “TA” shows on the display panel, the sys-
		If “TA” shows on the display panel, the sys-

ually on the Travelstore bank (see “Storing tem will scan the stored traffic stations only. stations”).

SVENSKA ESPAÑOL PORTUGUÊS

Blaupunkt RCR 127 Changing the memory bank, Storing stations, Recalling stored stations