Blaupunkt RCR 127 Storing programme types PTY priority, Scanning stations with PTY-SCAN

- automatically switches back to NDR3. - NDR2 airs a “PTY-POP” programme.

- The system will switch to the linked NDR2 station for the duration of the “POP” programme.

Storing programme types	PTY priority
At the factory, one programme type was	Situation:
assigned to each of the preset buttons 1-6.	PTY is switched on and lights up in the dis-
If desired, you can also store other availa-
	play.
ble programme types.
	No station offering the selected programme

To do so, make sure that “PTY” lights up in type can be currently received (neither with
the display.	seek tuning nor with scan).
• If necessary, press the PTY button to
	The set will switch back to the previous sta-
switch on the function.	tion.
• Select a programme type using but-	As soon as a programme with such PTY can
tons << >> and	be received within the broadcasting network,
• hold down the desired preset button	the unit will switch over to the correspond-
	ing	station for the	duration of	the pro-
(1-6) until you hear a beep.
	gramme.
Now the selected programme type can be
recalled by pressing this preset. For this, the	Example: German		broadcasting	network
PTY function must be active.
	NDR:
Scanning stations with PTY-SCAN	- Station tuned in: NDR3.
Condition: “PTY” must appear in the display. -		“PTY” lights up in the display.
• Press the SC button.	- Programme type “POP” selected.
All of the received stations offering the se-	- Seek tuning is started.
lected programme type will be scanned.	- No station with “PTY-POP” can be
To switch off PTY-SCAN:		found.
• Press SC once again.	- The display shows “NO PTY” and

During tape operation, the set will also au- tomatically switch to the programme offer- ing the selected PTY within the broadcast- ing network.

After the PTY programme the system will remain in the radio mode.

Notice:

As mentioned earlier, these functions are currently only supported by a limited number of RDS stations.

36