Operating the tuner
sports, classic, etc.) in the "Program Type" menu, the tuner automatically searches the next station broadcast- ing this program type in the selected direction. For this purpose, the station must be broadcasting the corre- sponding PTY identification as RDS service.
•If you activated the automat- ic change to alternative fre- quencies in the "RDS" menu, the tuner searches for the same station on a different frequency.
•If you selected the "PTY OFF" option in the "PROG TYP" menu and deactivated the automatic change to alterna- tive frequencies in the "RDS" menu, you can manually ad- just the tuner in increments of 100 kHz.
As soon as a station has been lo- cated, it is played. The station name appears on the display after a few seconds if the station pro- vides this RDS information.
You can now store this station (see the next section) or restart the manual station seek tuning.
Automatically searching for stations
➔While the tuner display ap-
pears, press on or on the rocker switch 3.
The tuner searches for the next station in the current wave- band in the selected direction. The settings in the menus "Sensitivity" (see page 92) and "Program Type" (see page 92) are incorporated.
As soon as a station is located, the seek tuning stops and the lo- cated station is played. The sta- tion name appears on the display after a few seconds if the station provides this RDS information.
You can now store this station (see the next section) or restart the automatic station seek tuning.
Note:
If you press and hold or on the rocker switch 3, the auto- matically seek tuning skips the stations found until you release the rocker switch again.
86