Blaupunkt 7 646 521 310, 7 646 520 310 Creating/changing a user-defined equalizer setting Adjust

Changing basic settings in the settings menu

Creating/changing a user-defined equalizer setting (Adjust)

You can adjust the three different user-defined equalizer settings to different situations, e.g. for the driver alone, for driver and passenger or for passengers in the front and the rear.

➔Select the user-defined equalizer setting which you want to create/ change as described in the preceding section.

➔Press the softkey < (next to "Adjust"). The "User EQ 1/2/3" menu opens.

Microphone?

Place Micro 1

Adjust

	User EQ 1
Automatic	Manual

	User EQ 1
EQ Low 1	EQ High 2
EQ Low 2	EQ High 3
EQ High 1	EQ High 4

Automatic:

You can automatically create one of the three equalizer settings us- ing a measurement microphone (available as an accessory).

Before starting, ensure the fol- lowing:

•The measurement microphone must be connected before in- stalling the device as described in the installation instructions of the measurement micro- phone.

•There must be true silence during the measurement since external noise falsify the meas- urement. For this reason, close all windows, doors, and the sliding sunroof. Switch off the engine, but leave the ignition switched on.

•The temperature inside the vehicle must be below 55 °C.

•All the loudspeakers must be connected. The sound radi- ating from the loudspeakers must not be obstructed by any objects.

➔Position the measurement microphone

•for the driver only – 10 cm next to the right ear of the driver,

•for driver and passenger

– exactly between both at the head level,

•for passengers in the front and rear – at the head level in the center of the vehicle.

107