Changing basic settings in the settings menu
Selecting a sound preset (Presets)
This menu item allows you to se- lect one of the following sound presets: Vocal, Disco, Rock, Jazz, or Classic.
➔Press the softkey located next to the desired sound preset.
•: The sound preset is se- lected.
•: The sound preset is not selected.
Setting the speed-dependent volume increase (Auto Sound)
When you are driving faster, the device can automatically increase the volume to compensate for the driving noise. In order for this to work, the speedometer signal must be connected as described in the installation instructions. You can adjust this volume in- crease from 0 (no increase) to 5 (maximum increase).
➔Press the softkey 9 (next to "Auto Sound").
The "Auto Sound" menu appears.
Note:
If no increase is set, the display shows "AUTO SND OFF".
➔On the rocker switch 3, press or to raise the volume in- crease.
➔On the rocker switch 3, press or to lower the volume in- crease.
Setting the bass increase (X-Bass)
➔Press the softkey ; (next to
The individual frequencies are displayed as bars and the bass increase as bar segment.
➔On the rocker switch 3, press or to select the desired fre- quency.
➔On the rocker switch 3, press or to set the desired bass increase.
Switching off the equalizer
➔Press the softkey : in the "Digital Equalizer" menu (next to "Off").
110