JVC KV-C10 manual Select TV as the input source, Select the channel you want to watch

ENGLISH

3

Monitor Remote

	CH
H/P	MODE	H/P
VOL		VOL

MODE

CH

Select TV as the input source.

Press the MODE button on the monitor or the remote controller repeatedly to select TV.

TV VIDEO1 VIDEO2

4

Monitor Remote

UPCH

or	H/P MODE	H/P
	VOL	VOL
	CH

DOWN

Select the channel you want to watch.

Press the UP or DOWN button on the monitor or the 5CH or ∞ CH on the remote controller to change the channels.

08

Selected channel number appears on the screen for a while.

If the channel selection is set to “AUTO” (See page 12.) You can select only the channels preset by the auto memory function. (See page 11.)

If the channel selection is set to “MANUAL” (See page 12.)

You can select all the channels. (Channel coverage: VHF channels 1 to 12, UHF channels 21 to 69)

5

Adjust the volume level on the car receiver.

To turn off the power

Press the POWER button on the monitor or the (power) button on the remote controller.

• Turning off the engine will also turn off the TV tuner system.

10