JVC KV-C10 manual Remove the back cover, Install the batteries, Close the back cover

ENGLISH

Before using the remote controller:

•Aim the remote controller directly at the remote sensor on the color monitor. Make sure there is no obstacle in between.

•Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).

Remote sensor

Installing the batteries

When the controllable range or effectiveness of the remote controller decreases, replace the batteries.

1. Remove the back cover.

While pushing on the back cover, slide it in the direction of the arrow.

2. Install the batteries.

Place the two batteries R03(UM-4)/AAA(24F) supplied into the remote controller as illustrated.

3. Close the back cover.

Slide the back cover in the direction of the arrow until a click is heard.

8