JVC KS-F190 manual Tuning in to a preset station, Manual preset, Tune in to a station of 88.3 MHz

ENGLISH

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band

1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).

Each time you press the button, the

FM band changes as follows:

FM1FM2

FM3

AM

2 Tune in to a station of 88.3 MHz.

To tune in to stations of higher frequencies

To tune in to stations of lower frequencies

Tuning in to a preset station

You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on page 7 and 8.

1 Select the band (FM1 – 3, AM) you want.

FM1FM2

FM3

AM

2 Select the number (1 – 6) for the preset station you want.

3 Press and hold the number button (in this example, 1) for more than 2 seconds.

Preset number “P1” flashes for a while.

4 Repeat the above procedure to store other stations into other preset numbers.

Notes:

• A previously preset station is erased when a new station is stored in the same preset number.

• Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery

8

replacement). If this occurs, preset the stations again.