JVC KS-FX722R manual To cancel Advanced SCM SCM Link, To select the telephone muting TEL

To cancel Advanced SCM – SCM LINK

You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources.

When shipped from the factory, a different sound mode can be stored in memory for each source so

that you can change the sound modes simply by changing the sources.

•LINK ON: Advanced SCM (different sound modes for different sources).

•LINK OFF: Conventional SCM (one sound mode for all sources).

To select the telephone muting – TEL

This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2,” whichever

mutes the sounds from this unit.

When shipped from the factory, this mode is deactivated.

•MUTING 1: Select this if this setting can mute the sounds.

•MUTING 2: Select this if this setting can mute

	the sounds.
• OFF:	Cancels the telephone muting.

ENGLISH

To select the changer display – CH DISP

You can change the initial indication on the display either to disc number or to elapsed playing time, while using the CD changer.

When shipped from the factory, “DISC” is selected.

•	DISC:	Shows the disc number and track
		number.
•	TIME:	Shows the elapsed playing time.

To select the level meter – LEVEL

You can select the level display according to your preference.

When shipped from the factory, “AUDIO 2” is selected.

•AUDIO 1: Level meter illuminates from bottom to top.

•AUDIO 2: Alternates level meter (moves from bottom to top) and illumination

	display.
• OFF:	Erases the audio level indicator.

To select the external component to use

–EXT IN

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component – CD changer or external component – to use.

When shipped from the factory, CD changer is selected as the external component.

• LINE IN: To use the external component other than CD changer.

• CHANGER: To use the CD changer.

Note:

For connecting the Line Input Adaptor KS-U57 and the

external component, refer to the Installation/Connection Manual (separate volume).

21