KeyCard/TMC DriveCard theft protection system

This car radio comes equipped with a rea- dy-to-use KeyCard. You can purchase a TMC DriveCard at your dealer’s, but it must be “trained” before you can use it.

Please refer to the information in the sec- tion on “Training the TMC DriveCard”.

The car radio can also be operated with a second KeyCard.

If you have lost your KeyCard/TMC Drive- Card or if it was damaged, you can buy a replacement from your specialised dealer.

If you use two KeyCards, you can individual- ly store the following functions:

Bass, treble, balance and fader settings, Loudness, TA (traffic announcement volu- me), TA priority, AF, beep volume, mute volume, lo or dx, PTY functions.

In addition, the settings activated before the radio is switched off, such as the waveband and station selection, will also remained stored. This ensures that you will find your basic settings re-adjusted automatically as soon as you have inserted your KeyCard.

A TMC DriveCard trained for this unit ad- opts the basic settings on the first KeyCard.

Operating the unit for the first time

•Switch the car radio on.

With the card tongue protruding from the unit, insert the KeyCard with the contact surface facing up into the slot in the centre of the indentation.

The car radio is now ready for operation.

If a wrong KeyCard is inserted, then “CARD ERR” will appear in the display.

Please do not attempt to operate the car radio.

After approx. 10 sec., the car radio will switch off.

If you insert the wrong type of card (e.g. te- lephone card or credit card) “WRONG KC” will appear in the display for approx. 2 sec.

Remove the wrong card and insert the cor- rect KeyCard.

After “CARD ERR” or “WRONG KC”,

•press ON to switch the car radio on.

Removing the card

•Pull the card forward and remove it from the slot.

“Training” a TMC DriveCard /Re- placing a KeyCard

It is possible to “train” a TMC DriveCard/ KeyCard when the unit is in operation with the first KeyCard. If you want to “train” a second TMC DriveCard or KeyCard:

•Insert the first KeyCard and turn on the car radio.

•Press DSC and use / to select “LEARN KC”.

•Press << or >>.

“CHANGE” will now appear in the display.

•Remove the first KeyCard and insert the new one while “CHANGE” appears in the display.

When the display reads “READY” or “LEARN KC”.

•press DSC.

Now you can also use the new TMC Drive- Card/KeyCard to operate your unit.

A number of other TMC DriveCards and a maximum of two KeyCards can be used with the car radio.

If you attempt “train” a third KeyCard, the access authorisation for the KeyCard not used for the “training” process will be dele- ted automatically.