Viking TMC 148 Scanning stations with PTY Scan, Storing programme types, PTY priority

Page 19

Radio operation with RDS (Radio Data System)

DEUTSCH

Press << or >>; the programme type selected last will be displayed for

3 sec.

During this period press >> (for- wards) or << (backwards) to select the desired programme type.

Press << or >> as many times as re- quired.

If you would like to listen to a station with the selected PTY,

press / to start the seek tuning function.

hold down the desired station selection key (1 - 5) until you hear a beep.

Now the selected programme type can be recalled by pressing this station selection key when “PTY” appears in the display.

Scanning stations with PTY SCAN

Important: PTY must appear in the display.

Press SC.

All of the stations in your current reception area offering the selected programme type will be scanned.

Example:

- Station playing: NDR3.

- “PTY” lights up in the display.

- Programme type “POP” selected.

- Seek tuning is started.

- No station with “PTY-POP” can be

found.

- The display shows “NO PTY” and

- automatically switches back to NDR3.

- NDR2 airs a “PTY-POP” programme.

- The radio will switch to the linked stati-

ENGLISH

ÇFRAN AIS

If the radio is unable to find a station offe- ring the selected programme type, the dis- play will show “NO PTY” and you will hear a beep tone. The radio will select the station which was playing before seek tuning was activated.

Storing programme types

Each of the station selection keys 1 - 5 has been assigned one programme type at the factory.

If desired, you can also replace these with other available programme types.

To do so, make sure that “PTY” lights up in the display.

If necessary, press PTY to switch on the function.

Select a programme type with << >> and

To switch off PTY-SCAN:

Press SC or the seek-tuning rocker switch once again.

PTY priority

Situation:

PTY is switched on and lights up in the dis- play.

No station offering the selected programme type can be found currently in your recepti- on range (with seek tuning or scan).

The car radio will switch back to the station previously tuned into.

As soon as it is possible to receive a pro- gramme in the broadcasting network with the PTY selected, the radio will switch over to the corresponding station for the durati- on of the programme.

on NDR2 for the duration of the “POP”

programme.

During CD operation, the car radio will also switch to the programme offering the selec- ted PTY within the broadcasting network.

After the PTY programme has ended the system will switch back to the previous mode (radio or CD).

Note:

As already mentioned, these functions are not supported by all of the RDS stations at the present time.

ITALIANO NEDERLANDS SVENSKA

ÑESPA OL

PORTUGU SÊ

19

Image 19
Contents Operating Instructions Viking TMCPage Contents Quick Reference Section AUD B DSC-MODE a PTY@ Quick Reference SectionInserting the card Quick ReferenceDisplay KeyCard/TMC DriveCard theft protection systemBND MIX Additional EQU ON/OFF function Setting the balance left/right and fader front/rearTo switch off AUD Press the key briefly AUDImportant notes Important notes GuaranteeInternational telephone informa- tion Operating the unit for the first time KeyCard/TMC DriveCard theft protection systemRemoving the card KeyCard/TMC DriveCard theft protection system AF Alternative frequency Radio operation with RDS Radio Data SystemREG Regional programme Scrolling through the broadcast networks FM only Station tuningRadio operation with RDS Radio Data System Selecting a wavebandStoring stations Switching between the memory banks FMScanning stored stations with Preset Scan To start Preset ScanScanning stations with Radio Scan Selecting the automatic tuning sensitivitySwitching from stereo to mono Automatic bandwidth adjust- ment FMNews Programme typeWeather Finance Storing programme types Scanning stations with PTY ScanPTY priority Traffic announcement priority on/off Automatic seek tuning startSwitching the warning beep off Traffic information station reception with RDS-EONTraffic information can be selected TMC -Traffic Message ChannelTMC Help Selecting a TMC stationMaking a selection for TMC TMC -Traffic Message ChannelActivating your selection Activating stored areas or roads selectionTMC traffic information Switching TMC on/offRemoving a CD CD modeSwitching to CD mode Inserting a CDDisplaying the clock Setting the clockCorrecting the clock after the power has been disconnected Clock TimeSetting the equaliser Lower mid-range Setting the equaliserAssistance in setting your equaliser Frequency range Sound impression/problem What to do BassDSC Programming DSC Programming To quit the DSC programming mode and store the adjustment Overview of the DSC factory settingsCLK AUTO/MAN CD player SpecificationsAmplifier TunerBosch Gruppe TMC areas