DSC Programming

SHARX	Switches the bandwidth in	LO-DX	Adjusts the seek tuning sen-
	the FM frequency range.		sitivity.
	When there are a large		“LO” stands for local recepti-
	number of stations within		on.
	your current reception ran-		“DX” stands for distant re-
	ge, use << >> to switch to		ception.
	SHARX ON which will pre-		Select “LO 3” if you want to
	vent most interference from		receive strong stations in
	adjacent radio stations.		the local area, select “DX 1”
	This function has been set		if you want to tune into wea-
	to “SHARX ON” at the facto-		ker stations which are furt-
	ry.		her away.
LED ON	Here you can choose bet-	TA VOL	Adjusts the traffic announce-
	ween LED ON or LED OFF.		ment and warning beep vo-
	With LED ON, the KeyCard		lume from between 0 to 66.
	tongue will flash for extra		The traffic information will
	theft protection when the		then come through at this
	unit has been switched off		volume, if the standard volu-
	and the KeyCard removed.		me is lower.
			If the standard volume is set
BEEP	Acknowledgement tone for		higher than the TA VOL le-
BEEP	Acknowledgement tone for		vel, then the traffic informati-
	all functions which require a		vel, then the traffic informati-
	all functions which require a		on will be played at the stan-
	key to be pressed for more		on will be played at the stan-
	key to be pressed for more		dard volume.
	than one second.		dard volume.
	than one second.
	The volume can be adjusted
	from between 0 to 9.	SCANTIME	Use this function to set the
	(0 = off)		scan time (5 to 30 sec.) for
			the radio or CD player.

Switch modes by pressing

<< >>.

The mode selected will ap- pear briefly in the display. The radio will automatically switch to STEREO playback each time it is switched on.

AM ON/OFF It is possible to block out one or both AM wavebands (MW/LW).

This can be useful to limit the wavebands available to those you really want to use and reduces the number of times you are required to press BND.

AM ON – all wavebands

LOUDNESS Loudness boosts the bass sound at low volume to pro- duce a more natural sound. LOUD 1 - low boost LOUD 6 - highest boost