Viking TMC 148 Switching to CD mode, Inserting a CD, Removing a CD, Selecting tracks

Page 25

CD mode

You can use this car radio to play CDs.

Note:

Use only standard circular CDs measuring 12 cm in diameter!

CDs measuring 8 cm in diameter or CDs in different shapes such as a butterfly or beer mug are not suitable for playback using this equipment.

This is very likely to result in the destruction of the CD or the CD drive.

We assume no liability for damage to the equipment caused by playing unsuitable CDs.

Switching to CD mode

A CD is inserted in the car radio, “CD” ap- pears in the display.

Use SRC to switch the sound source:

Press SRC repeatedly until the CD functions appear in the display (track number, elapsed playing time).

Inserting a CD

Switch on the car radio.

Insert a CD (with the label facing up). Never use force.

The CD will be transported to its playing position automatically. CD playback will start.

Removing a CD

Press SRC for approx. 1 second. The CD will be ejected.

To protect the CD mechanism, do not im- pair or try to help the automatic insertion and ejection of the disc in any way.

If the CD is not removed from the drive wi- thin approximately 30 seconds, it will be re- inserted automatically.

Selecting tracks

After you insert a CD into the car radio, the CD functions will appear in the display.

/ Track selection Up

Down

If you press once only, the track play- ing will re-start.

Fast forward, audible (CUE).

Hold down as long as necessary.

Fast reverse, audible (REVIEW). Hold down as long as necessary.

The rocker switch acts as a sequence switch so that you can skip over several tracks if you press it repeatedly.

The number of the track playing will appear beside “T” in the display.

MIX

CD tracks can be played back in random order. To indicate that MIX is switched on, “MIX CD” will appear in the display when you switch to the CD mode and each time a new track begins to play.

To switch MIX on/off:

Press 3/MIX briefly.

If “MIX OFF” appears, the function is not active.

SCAN

Use this function to scan all of the CD tracks.

To start the Scan function:

Press SC briefly, “CD SCAN” will ap- pear in the display.

The titles will be scanned one after the other in ascending order.

To stop the Scan function:

Press SC once again briefly.

The track currently scanned will continue to play.

ENGLISH DEUTSCH

ÇFRAN AIS

ITALIANO NEDERLANDS SVENSKA

ÑESPA OL

PORTUGU SÊ

25

Image 25
Contents Operating Instructions Viking TMCPage Contents Quick Reference Section AUD B DSC-MODE a PTY@ Quick Reference SectionDisplay Quick ReferenceKeyCard/TMC DriveCard theft protection system Inserting the cardBND MIX To switch off AUD Press the key briefly Setting the balance left/right and fader front/rearAUD Additional EQU ON/OFF functionImportant notes Important notes GuaranteeInternational telephone informa- tion Operating the unit for the first time KeyCard/TMC DriveCard theft protection systemRemoving the card KeyCard/TMC DriveCard theft protection system AF Alternative frequency Radio operation with RDS Radio Data SystemREG Regional programme Radio operation with RDS Radio Data System Station tuningSelecting a waveband Scrolling through the broadcast networks FM onlyScanning stored stations with Preset Scan Switching between the memory banks FMTo start Preset Scan Storing stationsSwitching from stereo to mono Selecting the automatic tuning sensitivityAutomatic bandwidth adjust- ment FM Scanning stations with Radio ScanNews Programme typeWeather Finance Storing programme types Scanning stations with PTY ScanPTY priority Switching the warning beep off Automatic seek tuning startTraffic information station reception with RDS-EON Traffic announcement priority on/offTMC Help TMC -Traffic Message ChannelSelecting a TMC station Traffic information can be selectedMaking a selection for TMC TMC -Traffic Message ChannelActivating your selection Activating stored areas or roads selectionTMC traffic information Switching TMC on/offSwitching to CD mode CD modeInserting a CD Removing a CDCorrecting the clock after the power has been disconnected Setting the clockClock Time Displaying the clockSetting the equaliser Assistance in setting your equaliser Setting the equaliserFrequency range Sound impression/problem What to do Bass Lower mid-rangeDSC Programming DSC Programming To quit the DSC programming mode and store the adjustment Overview of the DSC factory settingsCLK AUTO/MAN Amplifier SpecificationsTuner CD playerBosch Gruppe TMC areas