Viking TMC 148 Radio operation with RDS Radio Data System, Selecting a waveband, Station tuning

Page 15

Radio operation with RDS (Radio Data System)

Press AF for approx. 2 sec. until “REG OFF” appears in the display.

Each time you switch on the car radio, “REG ON” or “REG OFF” will appear in the dis- play.

Selecting a waveband

The following wavebands are available: FM 87.5 - 108 MHz

MW 531 - 1602 kHz and LW 153 - 279 kHz

Press BND to select the waveband of your choice.

Station tuning

Seek tuning /

Press /; the car radio will automati- cally search for the next station.

If you hold / pressed up or down on the rocker switch, seek tuning will speed up in the corresponding direction.

Seek tuning

Manual tuning:

Press << >>; the frequency will change in short intervals in the corresponding direction.

If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up.

Scrolling through the broadcast networks (FM only)

You can use the << >> keys to tune into stations in your reception area.

If it is possible to receive several program- mes in the same broadcasting network, you

Note:

In the DSC menu it is possible to block MW or LW or both wavebands for station selec- tion.

This can be useful to limit the wavebands available to those you really want to use and reduces the number of times you are requi- red to press BND. If necessary, refer to the information in the section on “DSC Pro- gramming - AM ON or AM OFF”.

Up

Down

<</ >> Up/down in short intervals

(on FM only if “AF” is switched off)

Manual tuning with << >>

You can also tune into a station manually.

Important:

AF and PTY must be switched off (i.e. the symbols do not light up in the display).

If necessary, deactivate these functions:

Press AF or PTY.

can scroll through them by pressing >> (for- wards) or << (backwards), e.g. NDR 1, 2, 3, 4, N-JOY, ...

Important: you must have already tuned into the stations at least once and “AF” must be active (lights up in the display).

To do this, you can start Travelstore:

Press BND for 2 seconds; the system will start to run through the frequency band.

If “AF” is not lit up,

press AF.

It is now possible to select stations using << >>.

ENGLISH DEUTSCH

ÇFRAN AIS

ITALIANO NEDERLANDS SVENSKA

ÑESPA OL

PORTUGU SÊ

15

Image 15
Contents Operating Instructions Viking TMCPage Contents Quick Reference Section AUD B DSC-MODE a PTY@ Quick Reference SectionInserting the card Quick ReferenceDisplay KeyCard/TMC DriveCard theft protection systemBND MIX Additional EQU ON/OFF function Setting the balance left/right and fader front/rearTo switch off AUD Press the key briefly AUDImportant notes Guarantee Important notesInternational telephone informa- tion KeyCard/TMC DriveCard theft protection system Operating the unit for the first timeRemoving the card KeyCard/TMC DriveCard theft protection system Radio operation with RDS Radio Data System AF Alternative frequencyREG Regional programme Scrolling through the broadcast networks FM only Station tuningRadio operation with RDS Radio Data System Selecting a wavebandStoring stations Switching between the memory banks FMScanning stored stations with Preset Scan To start Preset ScanScanning stations with Radio Scan Selecting the automatic tuning sensitivitySwitching from stereo to mono Automatic bandwidth adjust- ment FMProgramme type NewsWeather Finance Scanning stations with PTY Scan Storing programme typesPTY priority Traffic announcement priority on/off Automatic seek tuning startSwitching the warning beep off Traffic information station reception with RDS-EONTraffic information can be selected TMC -Traffic Message ChannelTMC Help Selecting a TMC stationMaking a selection for TMC TMC -Traffic Message ChannelActivating your selection Activating stored areas or roads selectionTMC traffic information Switching TMC on/offRemoving a CD CD modeSwitching to CD mode Inserting a CDDisplaying the clock Setting the clockCorrecting the clock after the power has been disconnected Clock TimeSetting the equaliser Lower mid-range Setting the equaliserAssistance in setting your equaliser Frequency range Sound impression/problem What to do BassDSC Programming DSC Programming Overview of the DSC factory settings To quit the DSC programming mode and store the adjustmentCLK AUTO/MAN CD player SpecificationsAmplifier TunerBosch Gruppe TMC areas