Radio operation with RDS (Radio Data System)
Switching between the memory banks (FM)
You can switch between the memory banks I, II and T in order to store stations and re- call them later.
The currently selected memory bank will appear in the display.
•Press BND as many times as neces- sary until the desired memory bank li- ghts up in the display.
Storing stations
On FM, you can store five stations on the station selection keys 1, 2, 3, 4, 5, for each of the memory banks (I, II, T).
On MW/LW, you can also store five stati- ons each.
•Select the appropriate waveband by pressing BND.
•Tune into a station with the rocker switch (either automatically 
/
or manually << >>).
•Press the desired station selection key until the radio resumes play after the muting (approx. 2 seconds) or until you hear a beep.
Now the station has been stored.
The display will indicate which station sel- ection key is currently activated.
Note:
If you attempt to store a station which has already been stored, the corresponding sta- tion key and the memory bank will flash in the display if you are on a different memory bank.
Automatically storing the stations with the strongest reception with Travelstore
You can automatically store the five FM sta- tions with the most powerful signals in your current reception area sorted according to their signal strength. This function is parti- cularly convenient on longer trips.
•Press BND for 2 seconds.
The five strongest FM stations will be auto- matically stored on the “T” memory bank (Travelstore). When this process has been completed, the radio will play the strongest station.
If desired, stations can also be stored ma- nually in the Travelstore bank (see “Storing stations”).
Recalling stored stations
You can recall any stored station at the touch of a key.
•Select the waveband by pressing BND. For FM, also choose the corre- sponding memory bank by pressing BND as many times as necessary until the desired memory bank appears in the display.
•Press the corresponding station selec- tion key briefly to recall the station.
Scanning stored stations with Preset Scan
You can scan all of the stored stations on any of the wavebands and in the selected FM memory bank.
Preset Scan will not start unless PTY is switched off (“PTY” will not light up in the display).
•If necessary press PTY.
To start Preset Scan:
•Press SC for approx. 2 seconds.
All of the stations stored on the waveband selected will be scanned one after the other.
16