CD
SOURCE/ |
|
| Rotary |
| |
POWER | encoder | c | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
g f SEARCH/ 4(
) 5(
) 6(
)
QS
Playback
1 Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
The CD player begins playback from the first track on the disc. When a disc is already inserted, press SOURCE/ POWER to switch to the CD mode.
The mode will change every time the button is pressed.
TUNER → XM → CD → CD CHANGER* → TUNER
* Only when the CD changer is connected
2 Press gor fto select the desired track.
Returning to the beginning of the current track: Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track:
Press f.
Fast forward :
Press and hold f.
3 To pause playback, press
Pressing
4 To eject the disc, press c.
•Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either.
•
•If the CD is not removed for 15 seconds after it has been ejected, the player automatically draws the CD into the compartment to protect the CD.
Repeat Play
Press 4 (
) to play back repeatedly the track being played.
The track will be played repeatedly.
Press 4 (
) again and select OFF to deactivate repeat play.
RPT: Only a track is repeatedly played back
↓
(off)
M.I.X. (Random Play)
Press 5 (
) in the play or pause mode.
The tracks on the disc will be played back in random sequence.
To cancel M.I.X. play, press 5 (
) again.
↓
M.I.X.: Track are played back in
↓random sequence.
(off)
•A disc that contains more than 40 tracks may not be correctly played back with the M.I.X. function.
Scanning Programs
Press 6 (
) to activate the Scan mode.
The first 10 seconds of each track will be played back in succession.
To stop scanning, press 6 (
) and deactivate the Scan mode.
Track Search
You can search for tracks.
1 Press SEARCH/QS 
in the CD mode to activate Track Search mode.
2 Select a desired track by turning the Rotary encoder within 10 seconds.
3 Press the Rotary encoder to play back the selected track.
•Search mode in Track Search mode is canceled by pressing and holding SEARCH/QS 
for at least 2 seconds.
Quick Search
You can search for tracks.
1 Press and hold SEARCH/QS 
for at least 2 seconds in the CD mode to activate Quick Search mode.
2 Turn the Rotary encoder within 10 seconds to select a desired track.
The selected track is played back immediately.
•Search mode is canceled by pressing and holding SEARCH/QS 
for at least 2 seconds in Quick Search mode.