Indication for CD Player
HI TEMP
•Protective circuit is activated due to high temperature.
-The indicator will disappear when the temperature returns to within operation range.
NO DISC
•No CD is inserted. - Insert a CD.
NO DISC
•No indicated disc.
- Choose another disc.
Indication for XM Radio Mode
ANTENNA
•The XM antenna is not connected to this unit.
-Check whether the XM antenna cable is attached securely to this unit.
ERROR
•Mechanism error.
1)Press the c button and eject the CD.
If not ejecting, consult your Alpine dealer.
2)When the error indication remains after ejecting, press the c button again.
If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer.
•When “ERROR” is displayed:
If that the disc cannot be ejected by pressing c, press the RESET switch (refer to page 6) and press c again.
If the disc still cannot be ejected, consult your Alpine dealer.
Indication for CD Changer
HI TEMP
•Protective circuit is activated due to high temperature.
-The indicator will disappear when the temperature returns to within operation range.
UPDATING
•Radio is being updated with latest encryption code.
-Wait until encryption code is being updated. Channels 0 and 1 should function normally.
NO SIGNL
•XM signal is too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
LOADING
•Radio is acquiring audio or program information. - Wait until the radio has received the information.
OFF AIR
•The channel currently selected has stopped broadcasting. - Select another channel.
ERROR - 01
•Malfunction in the CD Changer.
-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine dealer.
•Magazine ejection not possible.
-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.
ERROR - 02
•A disc is left inside the CD Changer.
-Press the eject button to activate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer.
NO MAGZN
•No magazine is loaded into the CD Changer. - Insert a magazine.
– – – –
•The user has selected a channel number that does not exist or is not subscribed to.
-The unit will revert back to the previously selected channel.
•There is no artist name/feature, song/program title, or additional information associated with the channel at that time.
-No action needed.