Alpine CDA-9820XM owner manual General Customizing, External Device

SETUP

You can flexibly customize the unit to suit your own preferences and usage. Choose the SETUP menu from General Customizing, External Device, to select your desired setting.

The common operation for SETUP is step 1 to 4 as follows. See down below for further information about each SETUP menu.

1 Press and hold F/SETUP for at least 3 seconds.

SETUP mode is activated.

2 Press gor fto select the desired SETUP menu.

(e.g. Select SUBW (Subwoofer))

SUBW → CD-DA / CD/MP3*1 → SCR → MUTE → INT→ AUX → (AUX name)*2 → PWR → TEL*3 → CH NO/ALPHABET →

ADF → SUBW

*1 CD-DA/CD/MP3 is displayed when an MP3 compatible CD changer is connected. Refer to “Playing MP3 Data” on page 18.

*2 Displayed only when AUX is ON.

*3 TEL is displayed when the Alpine MobileHub is connected. Refer to “Setting the Automatic Calling” on page 19.

3 Press BAND/TEL. to change the setting.

(e.g. Select SUBW ON or SUBW OFF.)

4 Press F/SETUP again.

The display returns to normal mode.

General Customizing

Subwoofer On and Off

SUBW ON (Initial setting) / SUBW OFF

When the subwoofer is on, perform the steps below to adjust the subwoofer output level.

1Press the MODE (Rotary encoder) repeatedly to select the SUBW mode.

SUBW* → BALANCE → FADER → DEFEAT → VOLUME → SUBW

* Displayed when Subwoofer is set to ON.

2Turn the Rotary encoder until the desired sound is obtained.

Scroll Setting

SCR AUTO / SCR MANU (Initial setting)

This XM Radio can scroll the channel name, category, artist, and song title. If connected with a CD text compatible CD changer or MP3 compatible CD changer, this unit can scroll the disc and track names recorded on CD-TEXT discs, as well as the text information of MP3 files, folder names, and ID3 tags.

SCR AUTO : Channel name, category, artist and song title (XM Radio), and CD text information, the text information of folder and file names, and ID3 tags are scrolled automatically. SCR MANU : The display is scrolled only when a disc is loaded or when a track is changed, etc.

•The disc titles input manually (page 14) cannot be scrolled.

External Device

Turning Mute Mode On/Off

MUTE ON (Initial setting)/ MUTE OFF

If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.

Setting the AUX Mode (V-Link)

AUX ON / AUX OFF (Initial setting)

You can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA- 410C) to this component.

You can change the AUX name display when AUX ON is set. Select the AUX name by pressing gor f. Then press BAND/TEL. If the KCA-410C is connected, it is possible to select two AUX names.

•Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/POWER to select AUX mode and then press BAND/TEL. to select your desired device.