Alpine CDA-9820XM owner manual Playing MP3 Files with the CD Changer Optional

↓

(off)

Playing MP3 Files with the CD Changer (Optional)

If you connect a changer compatible with MP3, you can play CD- ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.

1 Press SOURCE/POWER to switch to the MP3 Changer mode.

2 Press any one of the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer.

The selected disc number appears in the display and MP3 files playback starts.

3 Press gor fto select the desired track (file).

Returning to the beginning of the current track (file): Press g.

Fast backward :

Press and hold g.

Advancing to the beginning of the next track (file) :

Press f.

Fast forward :

Press and hold f.

4 To pause playback, press -/J.

Pressing -/Jagain will resume playback.

•The unit can play discs containing both audio data and MP3 data.

•The track display for MP3 data playback is the file numbers recorded on the disc.

•While playing back MP3, press 8 or 9 to move the folder up or down.

•The root folder appears as 1 in the folder number display. Therefore, the first folder appears as 2.

Multi-Changer Selection (Optional)

Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA-410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX).

1 Press SOURCE/POWER on this unit to activate the CD Changer mode.

Alternatively, press SOURCE on the remote control (optional) to activate the CD changer mode.

2 Press BAND/TEL. on this unit to activate the CD Changer Selection mode.

The CD Changer Selection mode remains active for 8 seconds.

Alternatively, press BAND on the remote control (optional) to activate the CD changer selection mode.

3 Press BAND/TEL. until the desired CD Changer indicator appears on the display.

Alternatively, press BAND on the remote control (optional) until the desired changer indicator appears on the display.

•If the selected CD Changer is not connected, the display will show “NO CHGR.“

•To operate the selected changer, see “CD”(page10).

•For further details about the external input (AUX) when using KCA-410C, see “Setting the AUX Mode (V-Link)” on page 15.

Repeat Play

1 Press F/SETUP to illuminate the underlined portions of the “FUNC” indicator, and go to step above within 5 seconds.

2 Press 4 () to play back repeatedly the track being played.

The track (file) will be played repeatedly.

Press 4 () again and select OFF to deactivate repeat play.

CD mode :

RPT : Only a track is repeatedly played back

↓

RPT : A disc is repeatedly played back

↓

(off)

•When the Repeat ALL mode is selected, the unit repeatedly plays back all tracks on the disc selected.

•If REPEAT is set to ON during M.I.X. play in CD changer mode, M.I.X. will apply to the current disc only.

MP3 mode :

RPT : Only a file is repeatedly played back

↓

RPT : Only files in a folder are repeatedly played back

↓

RPT : A disc is repeatedly played back

↓

(off)

M.I.X. (Random Play)

1 Press F/SETUP to illuminate the underlined portions of the “FUNC” indicator, and go to step above within 5 seconds.

2 Press 5 () in the play or pause mode.

The tracks (files) on the disc will be played back in random sequence.

To cancel M.I.X. play, press 5 () again.

CD mode :

↓

M.I.X.: Track are played back in random sequence.

↓

M.I.X.:The tracks on all the CDs in the current magazine will be included in the random playback sequence.

17-EN